Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
January 10, 2024
Is there a detailed install manual for removing the hinge and replacing with this new part? Maybe a video or something. The door is a large assembly and I don't want to take the entire thing apart to resolve the hinge not closing all the way.
For model number ECS230
Hi Thomas, thank you for the question. We have found the instructions to replace the door hinge. These instructions may not be of the same model but will help you in removal. You may need to follow these steps:
1. Open the door and you will see the clips on either side.
2. It locks on to the both sides.
3. You can push that and when you pull it up about right there, grab the side.
4. Place the volume of the door on a protective surface.
5. Place the sole of your foot on the long arm of the hinge and make sure you have a protective sheet.
6. Push the top of the door towards the floor.
7. Press down by foot and remove it by slowly lifting up the foot, controlling the spring.
8. Put your foot on top of the other side and pull down the long part.
9. Un-thread all the screws, lift the piece of metal away from the other metal to expose the springs you track.
10. Push down a little right, taking some of these off.
11. You have another piece that is holding the piece to the part, so you have to bust that lace.
12. Take out all the screws with the glass to separate.
13. Move it out of the way and flip it over and you can see the hinges.
14. Tilt it up and it comes right out.
15. Follow the same procedure backward to complete the installation.
We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bruno
October 17, 2023
Do I need one or two hinges for the door to this model?
For model number ECPS 130
Hello Bruno, thank you for the question. You will need two door hinges for your model. We hope that helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.