Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Phenice R - January 15, 2024
Verified Purchase
Amazingly wonderful
That was great the washer is now working like a champ
Thank u so very much
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Would not spin
Took 4 screws out of back of control panel. Tested old capacitor. Installed new one. Put back on tested spin cycle everything is doing great
Ricky from KRUM, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
May 13, 2019
What is the function of this part. My washer fills but the motor does not agitate or spin. It does drain after about 15 minutes or so. Could replacing this part solve the problem?
For model number PS12582957
Hi Mike,
Thank you for your question. Washing machines use starter capacitors to start the motor by increasing the torque for a few moments. Once the motor is running, the capacitor disconnects, allowing the washer to start and stop as necessary through the cycle. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
October 20, 2023
DOES THIS KIT COME WITH THE CAPACITATOR SHOWN IN THE DIAGRAM,ITEM #8
For model number GTW335ASN1WW
Hello Dave, Thank you for your inquiry. This kit does come with the capacitator. We hope this helps.
Was this helpful?
Thank you for voting!
Yvette
November 1, 2023
THE WASHER TURNS ON BUT NO WATER AND IT DOESN'T RUN NOTHING COMES AT ALL IT JUST SHOWS THAT IT FILLS
For model number GTW330ASK3WW
Hi Yvette, thank you for the question. Based on our understanding, it seems that there is an issue with the water inlet valve, part number PS12726768. You may need to replace it to resolve the problem. We hope that helps!
WASHER ,SOMETIME SPIN AND SOMETIME NOT . I TEST CAPACITOR IS 60.8 MFD. I CAN HEAR MOTOR TRYING TO TURN UMMMM BUT IT NOT ABLE TO.
SHOULD I TRY ANOTHER CAPACITOR?
For model number GTW335ASN2WW
Hi Kevin, thank you for getting in touch. Based on our research, we would recommend checking the drain hose if it is clogged. If the drain hose is clear, then you may have a defective drain pump, part number PS12723115. It removes water from the washer during the drain portion of the cycle. We would recommend replacing the drain pump to fix the issue. We hope this helps, good luck with this repair!
Recently I replaced all the 4 supporters of the machine tub because when dry it was hitting on the sides.
I checked the capacitor, and it does not show any number and does not hold any power at all. I turn on the machine connected to power but the only thing I heard is the water pump working but nothing else works
For model number GTW485ASJ2WS
Hi Sigifredo, thank you for reaching out. We have concluded that the issue is probably with the shift actuator, part number PS16554752. It tells the washing machine when to shift from one function to another. We would recommend replacing the actuator to fix the issue. We hope this sorts out your problem!
