Make sure you haven't got the discount earlier.
Control Panel - Black WPW10380063
Fits your WDT710PAYW3 Dishwasher!
$
119.83
In Stock
Get FREE EconoShip on orders over $100! T&C apply
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your WDT710PAYW3 Dishwasher!
PartSelect Number PS11753960
Manufacturer Part Number WPW10380063
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool.
Part# WPW10380063 replaces these:
W10350246, W10380063
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dana
September 16, 2021
On control panel everything works except the start button do you think control panel has to be replaced
For model number WDT710payM6
Hi Dana,
Thank you for your question. Sometimes if one of the buttons a on a control panel is not working, you may use a hair dryer on low heat to see if you can get it to work. If this does not help, you may need to replace either the user control and display board or the control panel. We hope this helps! If you have any questions, please let us know.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Susan
11 days ago
WHEN CONTROL PANEL STOPS WORKING WOULD I NEED ANY OTHER PARTS OTHER THAN THE CONTROL PANEL?
For model number WDT710PAYM6
Hello Susan, thank you for reaching out. Based on the description that you have provided, you will only need to replace the user control and display board, part number PS11756841, to fix the issue. Good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Dale
December 26, 2017
It has power at the plug there are no lights on the program display. Can this be a latch issue or display panel issue. The front vent where the steam comes on the finish is coming off (i got this late 2013) should Whirlpool stand behind this product thanks
For model number WDT710PAYB3
Hi Dale,
Thank you for your question. It could be a latch issue. I would suggest testing your micro switches to make sure that they are working correctly on your latch. If it is not your latch however you will want to check the wiring harness to your control board. If your wiring harness shows no damage, then it would be your control board that is the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Jeanne
February 23, 2022
My dishwasher is difficult to start. Starts to drain, then quits running. By playing with the control start button many times I can finally get the dishwasher to run. The error message code is 6-2. I am unsure which part would be the correct replacement control panel that I need or is it a combination of replacement parts.
For model number WDT710PAYM2
Hello Jeanne, Thank you for writing. We suggest checking the water supply to the dishwasher for proper flow and good pressure. Check wiring to the water inlet valve. If the wiring and the water supply checks out then test the water inlet valve. Use your multitester to test the valve for continuity. Set the device to the ohms setting x 1. Touch each of the meter's probes to a terminal. If you receive a reading of infinity, it means the valve's solenoid is faulty and the valve needs to be replaced. If your valve has two solenoids (four terminals), test the second pair of terminals in the same manner. If either pair of terminals receives a result of infinity, replace the water inlet valve. If the Valve is good, then replace the electronic control board. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
Daniel
September 26, 2023
I cannot change the wash features anymore. Pressing the soft control buttons does not change the blue led lights. The Heavy wash is locked into memory and only the start button works. Not even the cancel button works any more. Everything else works fine. Can you tell me what part to order?
For model number WDT710PayM3
Hi Daniel, thank you for the question. We believe your dishwasher is having this problem due to a faulty user control and display board, part number PS11756841, which may need to be checked. If this part is faulty, you may need to replace it. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11753960
Manufacturer Part Number: WPW10380063
Manufacturer Part Number: WPW10380063
Brand
Model Number
Description
Back to Top
Control Panel - Black
$
119.83
In Stock
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.