Part Location Diagram of WPW10327249 Whirlpool Water Inlet Valve
See part 7 in the diagram
Replacing your Whirlpool Dishwasher Water Inlet Valve
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Water Inlet Valve WPW10327249

★★★★★
★★★★★
22 Reviews

Rated by 3 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 74.60
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11752927
Manufacturer Part Number WPW10327249
Manufactured by Whirlpool
Product Description

Water Inlet Valve Specifications

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Dishwasher Water Inlet Valve

Replacing your Whirlpool Dishwasher Water Inlet Valve
Troubleshooting
This part fixes the following symptoms:
Will not fill with water | Leaking | Not cleaning dishes properly | Noisy
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Maytag.
Part# WPW10327249 replaces these:
AP6019618, W10316814, W10327249, W11130743, WPW10327249VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
22 Reviews
4.5
Filter By Rating:
  • 5 Stars
    18
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    2
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
No water flow to dishwasher
Removed lower kick panel and there it was on the left hand side. Removed the waterline and removed the mounting screws. Disconnected the inlet waterline into the dishwasher. Removed the bad inlet valve and replaced in reverse order.
  • michael from LUMBERTON, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
High pitched noise when the washer filled at the beginning of the cycle.
Watched the video, it went as advertised. Easy repair and the noise is gone.
  • Robert from E GRAND FORKS, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water was entering the dishwasher.
Disconnected the water hose entering and one electrical plug alone with one screw that holds the valve to the machine. Replaced the old with the new and it worked.
  • Joseph from WAKE FOREST, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

16 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joy
March 19, 2018
My dishwasher seemed normal, but when the cycle was done, i realized that no water ever got into the machine; (lights worked, sounded like it was running.) the dishes were still dirty, the detergent had spilled out inside the door. What part would i need for this. The machine did sound a little different, but not noisy
For model number KUDS30ISSA
PartSelect logo
Hi Joy, Thank you for your question. if your dishwasher is not filling with water, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the water inlet valve, the circulation pump and motor, the overfill control switch, the hose clamp, the door balance link, the drain hose and the impeller and seal kit. I hope this helps. Thank you and have a great day!

18 people found this helpful.

Was this helpful?
Thank you for voting!
Dennis
December 7, 2017
If the water inlet valve is bad,or sticks open, would this cause water to pour out of the dishwasher under the door?
For model number MDB4949SDM
PartSelect logo
Hi Dennis, Thank you for the question. If the valve is stuck open it is allowing the dishwasher to overflow and will cause the water to leak from the bottom of the door. Hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Carlos
February 18, 2018
This is an inlet water valve for a kitchen aid. Part #w10316814. I am quite certain this is bad, it measures a resistance of 1000 ohms. What should the approximate resistance be?
PartSelect logo
Hi Carlos, Thank you for the question. The best way to test the valve is to check for power going to the valve. If there is power there, and no water, you will need to replace the water valve. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Greg
February 27, 2018
What voltage is the valve supposed to receive? It appears mine is getting 30vac.
For model number KUDS35FXSSg
PartSelect logo
Hello Greg, thank you for your question. The water inlet valve requires 110-120 volts to open. I hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Joe
January 19, 2018
Water pours in and does not stop and ultimately flows out the door. I think it is the valve that needs replacing but I keep seeing the overflow switch too. Can you help?
For model number MDB4949SDM1
PartSelect logo
Hello Joe, Thanks for your question. We would recommend testing both the water inlet valve and the overflow control switch for continuity with a multimeter, and replace either of them if they do not show continuity. The water inlet valve is more commonly at fault but it is a good idea to test both parts. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Carol
November 7, 2018
I had damage to my hoses from a rodent. We can replace the hoses but it seems the hard rubber elbow that attaches to the pump has been damaged also. We are not able to reconnect the hoses to what i assume is the pump. The part is held together with 2 clamps and i cannot find anything on your diagram that help identify what i am looking for. Do you think this dishwasher is repairable?
For model number WDF760SADW0
PartSelect logo
Hi Carol, thank you for your question. If this is the part that you inlet hose plugs into, then you would need to replace your valve. If it is the part that your drain hose connects to you will want to take a look at your Pump, Washarm And Motor Parts diagram. It sounds like that is the area that you are talking about. You will need to either replace the hose, part 20 in the diagram. Or you will need to replace the pump itself, part 9 in the diagram. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Marc
May 14, 2019
Are the following 2 inlet valve identical : W10327249 and w10327250? Can i replace one with the other?
For model number maytag dishwasher mdb7759aws3
PartSelect logo
Hello Marc, thank you for your question. Those two Water Inlet Valves are different. The correct replacement for your model is Inlet Valve part PS11738107.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jason
August 27, 2021
I have a water inlet valve the # on the valve is w10327250 but i cannot find this part any help would be great.
For model number WDF110PABB3
PartSelect logo
Hello Jason, Thank you for writing. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12578165. The original part was w10327250 but it was upgraded to PS12578165. Good luck with the repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jakob
April 28, 2023
I've noticed that if my dishwasher hasn't been ran in a while I will find water in the bottom. Could the valve be leaking? It will run a cycle just fine and all the water drains properly.
For model number WDT750SAHZ0
PartSelect logo
Hi Jakob, thank you for your question. According to our research, if the amount of water left in the dishwasher after a cycle is no more than two cups, then this is normal. Usually, the appliance remains wet after a cycle due to the condensation drying principle which creates water droplets in the tub. The moisture in the air condenses on the inside walls, runs off, and is pumped out. A thorough cleaning of the filter and hoses with vinegar and detergent might help prevent this issue. We hope this information helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jakob
April 28, 2023
Thank you for answering my previous question. There is definitely more then 2 cups of water. If I do not run my machine for a day or 2 there is enough water in there to cause it to overflow when the door is opened. Could this be water leaking in and a failure of the float switch? Again, under normal operation the machine works fine.
For model number WDT750SAHZ0
PartSelect logo
Hi Jakob, thank you for reaching out again. Yes, if the water is more than 2 cups and it is overflowing, it is recommended to check the float switch, part number PS11750031. This float switch, when activated, stops the flow of water into the dishwasher. A faulty float switch might be causing the water to flow continuously into the dishwasher. We hope this information helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752927
Manufacturer Part Number: WPW10327249
Brand
Model Number
Description
Kenmore
66213032K112
Dishwasher - Dishwasher
Kenmore
66213273K112
Dishwasher - Dishwasher
Kenmore
66512093K210
Dishwasher - UNDERCOUNTER DISWASHER
Kenmore
66512723K310
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66512723K311
Dishwasher - DISHWASHER
Kenmore
66512773K313
Dishwasher - Dishwasher
Kenmore
66512773K314
Dishwasher - Dishwasher
Kenmore
66512782K313
Dishwasher - Dishwasher
Kenmore
66512783K313
Dishwasher - Dishwasher
Kenmore
66512789K313
Dishwasher - Dishwasher
Kenmore
66512793K312
Dishwasher - Dishwasher
Kenmore
66512793K313
Dishwasher - Dishwasher
Kenmore
66513032K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513032K115
Dishwasher - DISHWASHER
Kenmore
66513032K116
Dishwasher - DISHWASHER
Kenmore
66513033K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513033K115
Dishwasher - DISHWASHER
Kenmore
66513033K116
Dishwasher - DISHWASHER
Kenmore
66513039K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513039K111
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513039K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513039K113
Dishwasher - UNDERCOUNTER DISHWASHER
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service