Average Repair Rating: 2.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice melt within ice dispenser bucket after ice produced.
Shut power and water off to unit. Removed all shelving. Removed all drawers. Remove freezer door and drawers for cleaning purposes. Remove top panel. Remove ice maker. Thoroughly clean both. Remove air tower and discard. Remove bottom panel that covers Damper Control assembly and evaporator. Remove Styrofoam support and retainer, discard
... Read more(most likely to crumble once moved). Remove and replace inoperative damper motor. Install new motor with new support and retainer. Re-install "cleaned bottom cover". Install new air tower. Re-install clean ice machine and top cover. Re-install cleaned drawers then shelving. Re-install all cleaned freezer components. Turn on power and water.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
August 25, 2023
How does this air tower attach/detach to back wall of fridge?
For model number WRF989SDAH02
Hello Kevin, thank you for the question. We have attached some relevant instructions to attach and detach the air tower. This may not be of exact same model, but will help you with the process. You may follow these instructions:
1) Remove the shelves.
2) Lift up on the front of the shelf, then up on the back and out to remove.
3) Repeat the same on the remaining shelves.
4) Now remove the crisper drawers by pulling them out.
5) Remove the two glass shelves.
6) Remove the platter shelf and crisper cover by lifting up and out.
7) Remove the pantry drawer by pulling it.
8) Remove the pantry support by lifting up on the middle.
9) Now open the water filter compartment and remove the screws with a nut driver.
10) Grab the top panel within the water filter opening. Be careful as it is still connected with a wire.
11) Next, disconnect the electrical connector by depressing the locking tab.
12) Locate these six locking tabs on the air tower.
13) Place one hand behind the tower and use a flat blade screwdriver to release the locking tabs while pulling the panel towards yourself.
14) Remove the thermistor cover by firmly pinching the top.
15) Now remove the thermistor from the cover.
16) Remove the screws on the damper cover using a nut driver
17) Remove the foam assembly by tilting the top out first.
You may follow the same instructions to reassemble it. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.