Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 1 at 11:59pm EST.
Filter Guard WP99001796
Fits your MDB4800AWB Dishwasher!
Rated by 5 customers
Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
Fits your MDB4800AWB Dishwasher!
PartSelect Number PS11747619
Manufacturer Part Number WP99001796
Manufactured by
Whirlpool
Product Description
Filter Guard Specifications
This gray filter guard is eleven inches long.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Jenn-Air, Amana.
Part# WP99001796 replaces these:
AP6014380, 99001796
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 5 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Loud Grinding Noise
We heard a horrible grinding noise just after starting the machine TWO DAYS before Christmas. On a whim, I disassembled the lower spray arm assembly right down to the wash impeller. I ran the dishwasher and heard no grinding noise, so I knew it wasn't a problem with the motor/bearings. After taking out the old parts, I noticed the dischar
... Read more
ge pump housing was in two pieces, and judging by the look of it and how those two pieces were fitting together, felt something must be wrong with them. I ordered a new discharge pump housing unit and a few extra parts just to be sure, and after 30 minute install of the new parts, the dishwasher is back to life. A $65 shot in the dark repair by a non-repairman vs. a new dishwasher... I'll take the shot in the dark. Thanks PartSelect!! I'm on to ordering a new utensil basket now!!
Read less
Other Parts Used:
-
Mark from Schenectady, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher made a grinding sound - very loud. Did a poor job cleaning.
I took the lower pump assembly apart to find the problem. The biggest challenge was figuring out how to remove the cover. In the center, the assembly is held together with a round plastic nut about 1.5 inches in diameter - simply rotate it counter-clockwise to remove. I then removed the pump housing and found the impeller broken in two
... Read more
and the disk that was supposed to be attached to the top of the pump housing broken off. This was causing the noise and greatly reduced efficiency of the pump. I replaced the impeller and upper pump housing (bought the gasket too since it is hard to remove the old one) and put everything back together using the diagrams provided on the site. While many rate this repair as "easy" - it is only after you figure everything out! If you knew exactly what you were doing, the project could be done in 10 minutes. I had to study the diagram and it took me some time to disassemble, figure out what was wrong, read posts, order parts and reassemble. I also replaced the handle which had broken on one side which was simple. Part select is outstanding - I've used this site for my fridge, oven and now dishwasher and have avoided expensive service calls. If you are technically inclined and patient, you can repair your own appliances.
Read less
Other Parts Used:
-
Brian from Elkridge, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishes Did Not Get Clean
Had a repairman come to clean out all the food that had gathered at the base. Once he showed me how to take the spinner off I was able to order the parts and install them in no time. It works great now. Repairman and parts cost me $100, better than buying a new one.
Other Parts Used:
-
Michael from Wynnewood, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arms were split in the seams & clogged
After I figured out how to remove the spray arms, and filter guard (that was the hardest part) it was a piece of cake. Just a matter of snapping the spray arm into the filter guard, and replacing it the dishwasher, and tightening it with the screw in retainer. Upper arm was also easy to replace after removing the top rack.
Other Parts Used:
-
James from Sun City, AZ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
12 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher was not cleaning well
I TOOK THE INSIDE PARTS ABOVE THE MOTOR APART AND TRIED TO CLEAN ALL THE CALCIUM AND MINERAL DEPOSITS THAT WERE PRVENTIN WATER FROM GETTING THROUGH. THERE WAS A LOT OF CALCIUM. MOST OF IT i WAS ABLE TO CLEAN AFTER A LOT OF SCRAPING AND SOAKING IN VINEGAR AND CLR. THE VINEGAR WAS THE MOST EFFECTIVE OF THE TWO.
i BROKE THE FILTER ... Read more GUARD WHEN I TOOK IT APART. I SHOULD HAVE CHECKED ONL.INE BEFORE i START IT. THE SECONDARY FILTER ASSEMBLY WAS TO FAR GONE DUE TO MY MISHANDLNG AND HEAVY DEPOSITS INSIDE THE FILTERS. PUTTING IT BACK WITH THE NEW PARTS WAS EASY BUT I HAD TO SUBSITUTE SCREWS BECAUSE THE ORIGINAL ONES WOULD NO LONGER HOLD TWO PARTS TOGETHER. THE PARTS WERE LEAKING TO MUCH WATER. ONCE I HAD IT BACK TOGETHER THE SECOND TIME IT WORKED FINE. HOWEVER I HAD REALIZED THAT THE O-RING WAS NOT MISSING (MY BAD EYES DID NOT SEE IT IN PLACE AND SO I THOUGHT I HAD LOST IT). i EMAILED PARTS SELECT FOR A RETURN AUTHORIZATION BUT NEVER HEARD BACK FROM THEM. MAYBE I NEED TO GIVE THEM A FEW MOR DAYS. THE O-RING COST $3.76 AND MY WIFE WILL NOT BE HAPPY TIL I GET THAT BACK. PARTS SELECT DIAGRAM AND PARTS PHOTOS AND ANOTHER WEBSITE WERE A BIG HELP..
i BROKE THE FILTER ... Read more GUARD WHEN I TOOK IT APART. I SHOULD HAVE CHECKED ONL.INE BEFORE i START IT. THE SECONDARY FILTER ASSEMBLY WAS TO FAR GONE DUE TO MY MISHANDLNG AND HEAVY DEPOSITS INSIDE THE FILTERS. PUTTING IT BACK WITH THE NEW PARTS WAS EASY BUT I HAD TO SUBSITUTE SCREWS BECAUSE THE ORIGINAL ONES WOULD NO LONGER HOLD TWO PARTS TOGETHER. THE PARTS WERE LEAKING TO MUCH WATER. ONCE I HAD IT BACK TOGETHER THE SECOND TIME IT WORKED FINE. HOWEVER I HAD REALIZED THAT THE O-RING WAS NOT MISSING (MY BAD EYES DID NOT SEE IT IN PLACE AND SO I THOUGHT I HAD LOST IT). i EMAILED PARTS SELECT FOR A RETURN AUTHORIZATION BUT NEVER HEARD BACK FROM THEM. MAYBE I NEED TO GIVE THEM A FEW MOR DAYS. THE O-RING COST $3.76 AND MY WIFE WILL NOT BE HAPPY TIL I GET THAT BACK. PARTS SELECT DIAGRAM AND PARTS PHOTOS AND ANOTHER WEBSITE WERE A BIG HELP..
Read less
Other Parts Used:
-
Nicholas from Massillon, OH
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747619
Manufacturer Part Number: WP99001796
Manufacturer Part Number: WP99001796
Brand
Model Number
Description
Amana
ADW662EAB-PADW662EAB0
Dishwasher
- Amana Dishwasher Model ADW662EAB-PADW662EAB0 (ADW662EABPADW662EAB0, ADW662EAB PADW662EAB0) Parts
Amana
ADW662EAC-PADW662EAC0
Dishwasher
- Amana Dishwasher Model ADW662EAC-PADW662EAC0 (ADW662EACPADW662EAC0, ADW662EAC PADW662EAC0) Parts
Amana
ADW662EAW-PADW662EAW0
Dishwasher
- Amana Dishwasher Model ADW662EAW-PADW662EAW0 (ADW662EAWPADW662EAW0, ADW662EAW PADW662EAW0) Parts
Back to Top
Filter Guard
$
17.35
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.