Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
October 23, 2021
My fridge makes ice, but will not dispense ice. I have checked the ice dispenser lever switch and freezer door switch. Both are good. I have checked the motor with 120V direct. It works. I have looked at the LCD controller board and see no way to switch a 120V load for the motor. Is there a relay in-between that controls the motor?
For model number ED2KHAXVB01
Hello Pat, Thank you for the question. There would be no relays separate from the relays made as part of the Dispenser Board. If the Auger Motor was tested in the Ice Bucket and is working, you may have a defective Dispenser Control Board. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
September 8, 2017
Does this board control whether crushed ice or cubed ice are dispensed? We are only getting crushed.
For model number ED5FHAXVS05
Hello Steve, thank you for contacting us. Yes, this is the main control board, you would select crushed or cubed on this. Good luck with the repair!
Was this helpful?
Thank you for voting!
David
February 18, 2018
Ice dispenser isn’t working. All mechanical parts look good, switch works, paddle activates panel light, but there’s no power to auger motor (verified w meter). The display and buttons work ok. Does this sound familiar? Everything on the board seems to work except power to the auger. Is there another relay some where that could cause this, or a problem with the wiring harness?
For model number ED2KHAXVQ01
Hi David, Thank you for the question. If there is no power going to the motor but the motor is good, you will need to replace the control board. The control board is responsible for sending the power to the motor. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
