YSF379LEKQ1 Whirlpool Range - Instructions
Sections
Manuals
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the YSF379LEKQ1
Pan scratched by housekeeper
Unscrewed old pan and screwed on new one.
Parts Used:
Kenneth A. from SANGER, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 of 2 people
found this instruction helpful.
Thank you for voting!
Light would not light
Pop old one out and new one in
Parts Used:
Total Repair Time:
15 - 30 mins
1 of 2 people
found this instruction helpful.
Thank you for voting!
broken glide
replaced glide with screwdriver. very easy
Parts Used:
Andrew J from MASSAPEQUA, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 of 3 people
found this instruction helpful.
Thank you for voting!
burned oven bulb
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new light bulb in was not the problem.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
3 of 9 people
found this instruction helpful.
Thank you for voting!
oven light burnt out
1. Unscrewed glass cover on bulb 2. Removed old bulb 3. Screwed in new bulb 4. Replaced glass cover 5. Mixed drink & baked cupcakes
Parts Used:
William from Schwenksville, PA
Total Repair Time:
Less than 15 mins
3 of 9 people
found this instruction helpful.
Thank you for voting!
oven light not working
replaced light socket but did not repair problem. must have burned the motherboard. pleased with service from your company.
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 6 people
found this instruction helpful.
Thank you for voting!
slides on lower drawer were broken
I used a phillips screwdriver and replaced the part with one screw.Very easy and replaced my lower drawer under my oven,it tool about three to five minutes at the most and my drawer works fine now.Thanks for the instruction video on line, it really helped.
Parts Used:
Leona R from Louisville, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 3 people
found this instruction helpful.
Thank you for voting!
door glide broken
removed the old ones.then installed the new ones.
Parts Used:
David from Port Orange, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
range handle fell off and screw got lost
It was worth the money for that little screw, since I didn't have to run all over trying to find the right one.
Parts Used:
Frances from palm beach gardens, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 of 4 people
found this instruction helpful.
Thank you for voting!
replaced oven lightbulb
peggy ann from forest city, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Inside Light would not work
Turned off CB for the oven,Remove the oven from the cabinet , remove the back of the oven, replaced the light Assembly. turned on CB for the oven, tested the light. and truned off the CB and replace the back and reinstalled the oven in the cabinet.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
2 of 7 people
found this instruction helpful.
Thank you for voting!
light bulb went out in my oven
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 7 people
found this instruction helpful.
Thank you for voting!
Bulb Replacement
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Light burned out in upper oven
Screwed in light bulb and glass protector
Parts Used:
Shirley from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Oven gets too hot,if set at 350 it heats to 550. Changed the sensor and was not the problem.
Took off the screws on the back of the stove and took out the sensor, and put in the new one.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
All Instructions for the YSF379LEKQ1