Models > DDC0580NKL > Instructions

DDC0580NKL General Electric Dryer - Instructions

All Instructions for the DDC0580NKL
106 - 110 of 110
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken belt
unscrewed and lifted top of dryer put belt around drum closed top put belt around motor pulley and belt tensioner and finished.( remember to unplug unit before working on it.)
Parts Used:
Drive Belt
  • Dennis from Hamburg, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Broken belt
I didn't know what was wrong at first, only that the dryer would not start. I bought it used so had no fear of taking it apart to diagnose. Found the broken belt inside, ordered a replacement, installed the new belt, then crossed my fingers. Was pleasantly surprised that was all that was wrong and that for less than $20, including shipping, a few hours of my time, and a little help from YouTube videos the dryer is working again!
Parts Used:
Drive Belt
  • Kevin from Simi Valley, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Dryer door would no longer shut.
Simply popped the old broken part out and popped the new part into place. I wasn't sure if it was the Latch Door or the Door Strike. Once the parts arrived, it was clear the Door Strike was not the issue.
Parts Used:
Door Latch
  • Fawn from Loganville, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
new lint filter
place new filter in
Parts Used:
Lint Filter with Frame
  • Claudia from Hammondsport, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
NO PROBLEMS---UNWRAP & pop in where old filter was removed--couldn"t be easier & it fit perfectly:-)
no instructions necessary for this part install
Parts Used:
Lint Filter with Frame
  • ROBERT from ALBION, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DDC0580NKL
106 - 110 of 110
Back to Top