Make sure you haven't got the discount earlier.
Drawer Slide Rail Bracket - Left Side WR72X10169
Fits your GCE21MGTBFSS Refrigerator!
★★★★★
★★★★★
Rated by 7 customers
Easy
15 - 30 mins
Ratings submitted by customers like you who bought this part.
Fits your GCE21MGTBFSS Refrigerator!
PartSelect Number PS967217
Manufacturer Part Number WR72X10169
Manufactured by
GE
Product Description
Drawer Slide Rail Bracket - Left Side Specifications
This is the replacement drawer side rail for the left side of your refrigerator. It is made of white plastic and is approximately 12 inches long, and 2 inches wide. The slide rail supports the crisper drawer as it slides in and out. If the slide rail is broken, you may have difficulty sliding the drawer in and out. This rail is for the left side of the drawer, and the slide for the right side is sold separately. This part is sold individually and is and OEM part.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR72X10169 replaces these:
AP3797006, 1093205, WR72X10047, WR72X10144
Customer Reviews
Average Rating:
4 Reviews
★★★★★
★★★★★
4.8
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Moore - August 25, 2021
Verified Purchase
Worked as hoped
The drawer slide rail bracket worked just as I had wanted. It properly supports that side of the ice bin. The other, bigger and far more expensive part, though, did not work.....
★★★★★
★★★★★
Charles D - August 21, 2019
Verified Purchase
Perfect fit and easy installation
Very prompt delivery. Part was very easy to install (2 screws). The rear screw is a bit hard to access so suggest dropping down ice maker unit to give you more room.
★★★★★
★★★★★
Paul L - May 13, 2019
Verified Purchase
Easy fix
Perfect match with original part, 2 easy hex screws to remove, used a short handled nut driver, done in minutes
★★★★★
★★★★★
Gary M - August 11, 2018
Verified Purchase
freezer
Part was correct. Exact fit. Took a little longer than expected. All good.
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 7 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Drawer slider rail bracket broke
I ordered a left side slider for the crisper door of my G.E. refrigerator.
II gave you the model and serial #. You sent me the wrong slider. '
shipping to me was $7.95, to return was another $9.90. I am very disappointed with your service.
The slider is not fixed yet; I am having it repaired thru the AHS. as I won't take ... Read more a chance that you would send me the wrong item again.
I feel that you should have absorbed the shipping fee, as it was your error.
II gave you the model and serial #. You sent me the wrong slider. '
shipping to me was $7.95, to return was another $9.90. I am very disappointed with your service.
The slider is not fixed yet; I am having it repaired thru the AHS. as I won't take ... Read more a chance that you would send me the wrong item again.
I feel that you should have absorbed the shipping fee, as it was your error.
Read less
-
MARILYN from WINDSOR, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left side freezer ice bucket rail broken.
Used nut cracker to take out 2screws. Had to take one screw from icemaker, raise it up slightly to get nutcracker accessibility. Price of cake. Ofelder
-
otis from LAND O LAKES, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bucket slide on left side had broken.letting bucket drop down.
I am a 64 year old woman.I will 65 in March. I do the plumbing and painting at our house and my husband who is 67 does the carpenter work, I help him by holding boards he is sawing etc. I though the job would be easier than it was, but it was still easy. I took out the first screw which was in plain sight, secound screw I could not get to
... Read more
, and thought oh no I will have to take some other things apart. but when I removed the screw to the ice maker shield it was easy to slide it down out of way, and I got to 2nd screw pretty easy, I removed 2nd screw put new slide in place put screws in place started 1 st screw, then 2nd screw then went back and tightened 1st and 2nd screw, put the ic maker shield back in place tightened the screw slide ice bucket back in place, and though now this will be ready for company coming for the Holidays.... YEAH....
Read less
-
Patricia from Richton, MS
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Defrost cycle failed, Defrost heat element burned out
A few years ago, the evaporator coils in the freezer started icing up. The defrost cycle had failed. The element was still working, so I was able to manually defrost by jumping the defrost element from the board (NOT recommended). After the defrost element burned out, I was stuck with defrosting manually using a hairdryer. Given this
... Read more
unit does not have the old-fashioned traditional defrost timer, and since I couldn't find any good information about the electronics back then, it appeared from my research I would have to spend nearly $200.00 for a new circuit board. Recently after discovering PartSelect, I was able to diagnose the failed defrost thermostat, ordered it and the defrost heat element, received them quickly, replaced them in less than a half hour, and now my fridge is like new!! Excellent site, PartSelect!!! Also, the Ice bucket glide was a simple replacement (of a broken glide) with two screws using a nut driver. Easy fix.
Read less
Other Parts Used:
-
Barry from Black Hawk, SD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator shelf bracket broken
Never had better internet experience. Looked up part and ordered in approximately 15 minutes. Received part the very next day. Easy install, just two screws. Repair = ten minutes. Price reasonable and very fast efficient service.
-
bill from north richland hills, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cronic icing in freezer compartment
First I removed the screws to all the interiors panels Then I replaced the fan and defrost heater braket assembly.
Other Parts Used:
-
Rick from Gresham, OR
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
6 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A end piece cracked
Removed the ice machine, removed the screws, and then put in the new part and replaced the screws
Other Parts Used:
-
Kathleen from Redlands, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS967217
Manufacturer Part Number: WR72X10169
Manufacturer Part Number: WR72X10169
Brand
Model Number
Description
Back to Top
Drawer Slide Rail Bracket - Left Side
$
32.48
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.