Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
September 8, 2017
My oven is not heating most likely is the element out, it is a gas GE about 12years old.
Hi Brian,
Thank you for contacting us. If your oven is not heating there a few parts you will need to check to see if they are causing the issue. You will need to check the fuses, if your stove has them, both the bake and broil elements, the temperature sensor and the electronic control board. I hope this helps with your repair.
Was this helpful?
Thank you for voting!
Billl Bashor
December 17, 2017
I have a Hotpoint rangel. The clamps have broken off the burners. I have 4 burners. 2 6" and 2 8" burners. Are the clamps wb02k10023? How much will the domes cost?
Hi Bill,
Thank you for your question. These clamps are for the bake and broil elements in the oven. Before we can assist you further we would need the model number from your appliance. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Ann
July 1, 2019
My Hotpoint oven heater is chipped and started burning when I turned the oven on. Can I get a substitute coil from you?
For model number 317B6641P001
Hello Ann, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.