Models > 36275892000

36275892000 Kenmore Range - Overview

Sections of the 36275892000

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Flat Style Oven Igniter Kit – Part Number: WB13K21
Flat Style Oven Igniter Kit
★★★★★
★★★★★
(96)
PartSelect #: PS231280
Manufacturer #: WB13K21
The flat style oven igniter kit comes with a mounting bracket and a wire connector with a plug. The igniter kit is used to light the oven burner. If you notice that your oven will not heat up properly...
$62.61
  In Stock
Order within the next 11 hrs and your part ships today!
Oven Rack – Part Number: WB48T10095
Oven Rack
★★★★★
★★★★★
(16)
PartSelect #: PS6447646
Manufacturer #: WB48T10095
The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides back and forth for e...
$65.01
  In Stock
Order within the next 11 hrs and your part ships today!
Light Bulb - 40W – Part Number: 40A15
Light Bulb - 40W
★★★★★
★★★★★
(6)
PartSelect #: PS217532
Manufacturer #: 40A15
$9.42
  In Stock
Order within the next 11 hrs and your part ships today!
Burner Head - Medium - 9500 – Part Number: WB16K10055
Burner Head - Medium - 9500
★★★★★
★★★★★
(9)
PartSelect #: PS1020327
Manufacturer #: WB16K10055
This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will n...
$35.75
  In Stock
Order within the next 11 hrs and your part ships today!
Top Electrode Mounting Clip – Part Number: WB01K10112
Top Electrode Mounting Clip
PartSelect #: PS3510420
Manufacturer #: WB01K10112
Sold individually.
$9.92
  In Stock
Order within the next 11 hrs and your part ships today!
Ignitor Mounting Screw – Part Number: WB1X1293
Ignitor Mounting Screw
★★★★★
★★★★★
(2)
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$6.68
  In Stock
Order within the next 11 hrs and your part ships today!
SCREW – Part Number: WB1K5062
SCREW
PartSelect #: PS234148
Manufacturer #: WB1K5062
$8.63
  In Stock
Order within the next 11 hrs and your part ships today!
Burner Cap - Medium – Part Number: WB29K10004
Burner Cap - Medium
★★★★★
★★★★★
(3)
PartSelect #: PS241263
Manufacturer #: WB29K10004
This part is the replacement burner cap for your gas range. It is made of gray plastic and is approximately 3 inches in diameter. It has 3 small tabs on the bottom, with one tab that is larger than th...
$36.66
  In Stock
Order within the next 11 hrs and your part ships today!
Double Porcelain Pan - Right Side – Part Number: WB34K10013
Double Porcelain Pan - Right Side
★★★★★
★★★★★
(1)
PartSelect #: PS244909
Manufacturer #: WB34K10013
$102.41
  In Stock
Order within the next 11 hrs and your part ships today!
Screw – Part Number: WR01X10065
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS283515
Manufacturer #: WR01X10065
Size: 10-32 GXTT FLP .595 Sold individually.
$6.68
  In Stock
Order within the next 11 hrs and your part ships today!
Burner Tube - Left Front – Part Number: WB28K10025
Burner Tube - Left Front
★★★★★
★★★★★
(6)
PartSelect #: PS240685
Manufacturer #: WB28K10025
$31.39
  In Stock
Order within the next 11 hrs and your part ships today!
Burner Tube - Right Front – Part Number: WB28K10024
Burner Tube - Right Front
PartSelect #: PS240684
Manufacturer #: WB28K10024
$36.51
  In Stock
Order within the next 11 hrs and your part ships today!

Questions And Answers for 36275892000

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 36275892000

[Viewing 7 of 7]
Gas igniter glows, but will not light
Fixed by
these parts
Show All
Little to no heat when baking
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Gas smell
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The igniter glowed, but never got hot enough to ignite the propane, so I did smell propane.
First, I removed the two screws that held the heat shield in place. Second, I removed the one screw that held a small wire covering. That covering kept the wires inside the back wall of the range. Third, I removed the two screws that held the Igniter Kit, and unplugged it from the back of the range. I then carefully put the new igniter in, and reassembled everything in reverse order. It only took about 30 minutes to do the repair, and 30 minutes of cleaning and wiping of the broiler area. (It is amazing what you see when you take things apart). I should have been wiping things up over the past few months. Overall, a very easy repair. I ordered the part at 12:30 in the afternoon, and FedEx delivered it the next morning at 11:30, all for the regular shipping price of $6.95. VERY HAPPY.....
Parts Used:
Flat Style Oven Igniter Kit
  • Sidney from Marysville, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
661 of 695 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would not light or keep temp.
first I thought it was a faulty gas valve, so I pulled it out, started researching for a replacement part, found your site and started research. I discovered thhat the igniter was the culprit, that info. saved me about a week of time and a 100 bucks, so I installed the gas safety valve back in the oven, patience is the word for the day, you cross thread this and you are done! any way ordered ignighter and it shipped to my house in about 4 days, New York to Calif. had it installed in about 15 minutes fired off the oven and ...IT worked hurray...10-9-2010,
Parts Used:
Flat Style Oven Igniter Kit
  • zack from corning, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
443 of 450 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat. This degraded over several weeks.
1. Pulled the 110V power plug. It was not necessary to turn off the gas; just be careful not to stretch or pinch the flexhose behind the stove.
2. Removed the oven door by opening a couple of inches then lifting upward.
3. Removed the warming drawer by pulling out to the stop, then pushing the small levers on the side of the track to release.
4. Removed two flathead screws at the back of the oven to free up the oven bottom panel.
5. Removed the bottom panel by lifting up the pack until the front edge clears the overhang.
6. Removed the two screws on the side that hold the igniter to the burner tube. Be sure not to let the screws drop into the gaps in the oven floor. Note the position of the bent tab with the holes to ease aligning the new part.
7. Reached through the warming drawer to release the plug by squeezing the tabs on the end.
8. Pulled the plug up through the gap in the oven floor (where the wires went through) and connected it to the other connector.
9. Ran the new wire down through the oven floor.
10. Aligned the new igniter and tightened them. Had trouble getting the screws started so I used a toothpick to align one hole while starting the other screw.
11. Replaced the oven bottom panel. It needed a little jockeying to get the screws and holes aligned.
12. Replaced the door.
13. Replaced the oven drawer.

This turned out to be a good time to clean all those dusty places that don't get cleaned that often.
Parts Used:
Flat Style Oven Igniter Kit
  • Durwood from Suffield, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
302 of 388 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!