GE/GE_Thumb/00106627i02.gif
See part 152 in the diagram
Replacing your General Electric Range Burner Cap - Medium play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Burner Cap - Medium

★★★★★
★★★★★
3 Reviews

Rated by 1 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 36275892000!
 Fits your 36275892000!
PartSelect Number PS241263
Manufacturer Part Number WB29K10004
Manufactured by GE
You May Also Need?
Product Description

Burner Cap - Medium Specifications

This part is the replacement burner cap for your gas range. It is made of gray plastic and is approximately 3 inches in diameter. It has 3 small tabs on the bottom, with one tab that is larger than the others. This tab fits into the v-shaped slot. The burner cap is found under the grate, and it protects the burner. If your current burner cap is damaged or missing, this is the part that replaces it. Before you begin this repair, be sure that the burner cap and the grate are cool to the touch. To replace the burner cap, simply lift the grate off and remove the cap. Replace it with the new cap to complete your repair. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB29K10004 replaces these:
AP2027244, 256247
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Henry
December 7, 2019
How to take out and replace warm zone button
For model number wfe540hoes2
Hi, before you replace the warm zone switch button on your range be sure to unplug the power cord. Use a Phillips head screwdriver to unthread the screws securing the upper rear access panel. Pull the panel down to detach, use a small flat-head screwdriver to depress the front locking tabs to release the warm zone switch assembly then push the assembly forward. You will need to depress the rear locking tabs to release the bezel and the old button. To install the new warm zone switch button first make sure the switch itself is properly positioned in the control panel, then align the new button slide on the bezel, snap the bezel on to the switch and snap the assembly into the panel. Reinstall the upper rear access panel by inserting the upper tabs under the control panel, then align the bottom tab with the lower access panel. Replace the screws to secure. with the repair completed plug the power cord back in and your range should be ready for use. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your General Electric Range Burner Cap - Medium

Replacing your General Electric Range Burner Cap - Medium play video
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 1 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
we had damaged the burner cap
just removed the old burner cap and put on the new one.
  • Gary from Indio, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS241263
Manufacturer Part Number: WB29K10004
Brand
Model Number
Description
General Electric
147210
Range
General Electric
147211
Range
General Electric
147212
Range
General Electric
147213
Range
Kenmore
36272201890
Range
Kenmore
36272205891
Range
Kenmore
36272205892
Range
Kenmore
36272206893
Range
Kenmore
36272212101
Range
Kenmore
36272212102
Range
Kenmore
36272222200
Range
Kenmore
36272222201
Range
Kenmore
36272222202
Range
Kenmore
36272222203
Range
Kenmore
36272222204
Range
Kenmore
36272232200
Range
Kenmore
36272232201
Range
Kenmore
36272232202
Range
Kenmore
36272232203
Range
Kenmore
36272232204
Range
Kenmore
36272285890
Range
Kenmore
36272285891
Range
Kenmore
36272322100
Range
Kenmore
36272322101
Range
Kenmore
36272322102
Range
Kenmore
36272620301
Range
Kenmore
36272621301
Range
Kenmore
36272622300
Range
Kenmore
36272622301
Range
Kenmore
36272622302
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service