The control switch turns the surface element on and off and controls how much heat the element produces.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Samsung.
Part# DG44-01006B replaces these:
AP6037530
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elizabeth
April 5, 2024
This part says it's for part number 1-7 in the diaphragm but could it also work for the other dual burner on 1-9?
For model number NE59K3310SS
Hi Elizabeth,
Thank you for your question. Part 1-7 in the diagram, part number PS11771631, is used for the right-front dual burner. Part number 1-6 in the diagram, part number PS4240805, is used for the left-front burner. We hope this helps!
My oven continues to heat after reaching set temperature. Element does not shut off even when range beeps indicating temp is reached. If I set to 175, wait a few minutes after beep, shut off, reset to 450 the display will show oven temp well over 200 degrees. Thermostat seems to be working but element never shuts down. Is this the part I need?
For model number NE58K9430SS/AA
Hi Jeffrey,
Thank you for your question. If you have checked the oven temperature sensor and it reads fine, you will need to check the elements, the electronic control board and the wiring between the parts to see which one is causing the issue. We have included some links that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
the main burner stays lite no matter what temp setting I have it set at. burner stays red hot unless I turn stove off, please guide as I cannot find the element replacement..
For model number NE58K9430SS
Hi Scott, Thank you for writing. This is normally an indication the switch controlling the Burner with the issue is faulty and may need to be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.