Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jeffry H - June 15, 2019
Verified Purchase
Easy peasy, even for me!
The part was delivered when promised and was the exact part I needed. Btw, I am NOT a fix it man by any stretch, but went on you-tube and did it step by step! Woila! Washer works again!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ryan
May 16, 2019
My washing machine doesn't fill/or start to put water in, it will spin and discharge water, the lid sensor is fine and the timer seems to be fine, water lines/filters are good, how do i check if it's the pump or the direct drive?
For model number WTW57ESVW1
Hello Ryan, Thank you for the question. This sounds like an issue with the inlet valve, PartSelect Number PS11749611. You can test with a multi meter to see if it is getting 120 Vac. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jery
May 2, 2018
When we set the water to kool for colored clothes we get hot water only
For model number wtw58esvwd
Hello Jery, thank you for your question. If the unit is set to cold water, and you're only getting hot water there are two parts I would recommend testing/replacing. You will want to test the SWTCH-TEMP Part Number: PS11749685 as well as the water inlet Valve part number WPW10175893. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carl Buck
December 13, 2018
My machine does not fill with water.Hoses or filters are not clogged. With the machine plugged in i get line voltage to the common wire to both solenoids with the terminals disconnected. If the solenoids are connected there is line voltage at all 4 terminals. When i check the ohms across the solenoid terminals, no wires connected, i get a reading of .801 k ohms for cold and .785 k ohms for hot. From what i've read here i'm confused as to whether the valve is bad or not. My wife ran a load and it worked fine the next load no water.
For model number 11029822800
Hi Carl,
Thank you for your question. If the washer is not filling with water, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the pump, the lid switch and the direct drive water pump. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Lucia
June 17, 2019
There is no water when the machine starts.
For model number MVWC6ESWW0
Hi Lucia,
Thank you for your question. If the washer is not filling with water, there are some parts that you will need to check to see which one is causing the issue. You will need to check both the sensor switch and the lid switch. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
JOEL
December 30, 2022
with washer off water keeps coming in !
For model number wtw57esvwo
Hello Joel, thank you for contacting us. The issue is most probably related to the water inlet valve, part number PS11749611. We would also recommend inspecting the sensor switch, part number PS11752185. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!