Maytag/Maytag_Thumb/YQTCDHMB.gif
See part 4 in the diagram
Replacing your Kenmore Washer Flowmeter play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Flowmeter

★★★★★
★★★★★
10 Reviews

Rated by 12 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 104.80   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 11042926200!
 Fits your 11042926200!
PartSelect Number PS11748313
Manufacturer Part Number WPW10110225
Manufactured by Whirlpool
You May Also Need?
Product Description

Flowmeter Specifications

This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not fill with water | Will not stop filling with water | Leaking | Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# WPW10110225 replaces these:
AP6015043, 8181696, W10110225
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

14 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
August 9, 2017
I get the f20 on small cycle and big cycle.Its seems to be ok on the reg cycle.On the small load cycle it shuts off and i get the f20 code and water is still in the drum.Will the flow meter cause this problem as well? Thanks
Hi Ken, Thank you for your inquiry. The F20 error code is no water detect error. It means you either have very little water coming into the washer or no water is coming into the washer. In this situation where there is water coming into the washer it may be a siphoning issue. You will need to check the following: You will need to see if the hoses have any obstructions preventing the proper flow of water. You will need to check the drain pump to see if it is working correctly. You will also need to check the wiring connections to the electronic control board, the water inlet valve, the pump and the pressure switch. I hope this helps with the repair. Thank you and have a great day!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Ken
August 9, 2017
Why does the machine give me a f20 code and shuts off only in the small load and large loads and works great in the reg wash load.
Hi Ken, Thank you for your inquiry. The F20 error code means that you have a water supply issue. Press pause/cancel 2 times and if that does not clear the error code from your appliance you should check your inlet hoses to see if they are bent or damaged in any way. If everything on the outside of your machine is fine. You should check your water inlet valve for any damage and also test it with a multi-meter to see if it is the problem. Good luck.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Matthew
April 12, 2018
Hi i have this Maytag and when i turn it on the water gushes out of the flowmeter wpw10110225 from the bottom of the unit i changed the flowmeter and installed a new one and i am still having the same problem what else could this be do you think the second flowmeter i got is bad as well.
For model number mhw9000yw0
Hi Matthew, Thank you for your question. If the washer is leaking when it is not in use, the issue is likely the water inlet valve and it will need to be replaced. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Matthew
April 13, 2018
Hi i have this Maytag and when i turn it on the water gushes out of the flowmeter wpw10110225 from the bottom of the unit i changed the flowmeter and installed a new one and i am still having the same problem what else could this be do you think the second flowmeter i got is bad as well. This part wpw10110225 gushes water out from the top when in use when it’s turned off no water comes out of it
For model number wpw10110225
Hi Matthew, Thank you for your question. The flow meter could be at fault for this issue happening, you will need to inspect it and also check the water inlet valve. If a component in the water inlet valve is not working correctly, it may cause this to happen. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Hod
February 28, 2020
Water seeps into tub when it is turn off. Could this be the water inlet valve is not completely closing?
For model number MFW9600SQ0
Good Day Hod. Thank you for your question in regards to your unit (Model Number MFW9600SQ0). Based on our research, this may be the result of the Water Inlet Valve (PartSelect Number PS11745050) being faulty and needing to be replaced. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Henry
March 17, 2020
I have a Whirlpool wfw96heaco washer and it will not flush the fabric softener into the tub? I have run ohms test on all components but this, could this possibly be the problem? Not enough water pressure to get it through the dispenser tub??? any help would be much appreciated!!
For model number wfw96heaco
Hello, Thank you for your question. That could be the issue. However usually a dispenser issue is caused from the dispenser. We hope this helps.

Was this helpful?
Thank you for voting!
Andrew
June 11, 2019
I'm getting the f20 error code and I checked the water inline and it have plenty of pressure. I turn the washer on and it starts to fill I even see water flowing into the drum. Do you think the flow meter would fix this issue?
For model number WFW9500TC01
Hello Andrew, Thank you for the question. F20 Error Code. Whirlpool error code F20 appears when no water is detected entering the machine or if the pressure switch trip is not detected. If you still have watyer you may need a new switch, PartSelect Number PS11754448. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
J-P
October 16, 2019
Hi, some how-to videos indicate to install the flow meter horizontally rather than vertically (as you depict in your video) does this matter?
For model number WFW9400SW01
Hello J-P, thank you for your question. If the Inlet Hose and Flowmeter Hose are horizontal on your washer, then the Flowmeter will need to be installed horizontally, as it goes between the two Hoses. Good luck with your repair!

Was this helpful?
Thank you for voting!
Mark
February 20, 2020
Control panel lights up, after you press the start button door locks but no water enters the machine the voltage at the water valves is only 10 volts does this sound like a main control board problem? While watching the voltage reading at the water valves it's cycles several times with the consistent reading of only 10 volts
For model number WFW95HEXW2
Good Day Mark Thank you for your question in regards to your unit (Model Number WFW95HEXW2). Based on our research, you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Temperature Sensor (PartSelect Number PS11755214). 2) Door Lock/Latch (PartSelect Number PS11745083). 3) Flowmeter (PartSelect Number PS11748313). 4) Motor Control Board (PartSelect Number PS11753928). 5) Dispenser Actuator Switch (PartSelect Number PS11753574). 6) Noise Filter - 275V and 50/60Hz (PartSelect Number PS11753813). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.

Was this helpful?
Thank you for voting!
Related Parts:
Mike
August 14, 2019
My washer has a small puddle of water underneath the washer favoring the left side of the machine ( when facing the front of the washer). Puddle size is a about 2 dinner plates. The water seems to be clean water not soapy water. Can you offer any suggestion as to which part or parts i may need?
For model number WFW95HEXW2
Hello Mike, thank you for inquiring. You will want to consider either the Water Valve part number PS11751015 or the Pump Hose part number PS11755212 for your model. I hope this helps and good luck with your repair!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Kenmore Washer Flowmeter

Replacing your Kenmore Washer Flowmeter play video
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 12 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
washing machine giving f20 error code
removed washer top, checked supply hoses and inlet valve to make sure not clogged, replaced valve and while already there replaced flowmeter, reinstall top and hoses and checked machine operation, machine working fine and wife thinks i am her hero
Other Parts Used:
Water Inlet Valve
  • Jerry from Keenes, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
78 of 89 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F/H error code.
Removed the top (3-4 screws at back). Flowmeter has 2 hoses with hose clamps. Removed with plyers. Simple electrical connector removed.

Reversed procedure. Running perfect now.

How did I know it was the flow-meter? Read the service manual as possible causes to narrow it down. Disassembled old flowmeter and cleaned. That fixed for awhile. Problem came back, could 'tap' on flowmeter to temporarily fix. This convinced me that was indeed the problem.

The flowmeter is just a simple vane that moves as water flows across it, and sends pulses each time it rotates. If it 'sticks' then the computer doesn't think any water is coming in - hence the error. Tapping on it would 'unstick' long enough to confirm problem.
  • Jeff from Naples, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
56 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two problems- Error code FH, Water filling drum when washer off
The Part Select website has some great information provided by customers. I search my error code problem that shut down the washer when filling and found the most likely scenario was a faulty flowmeter.
The other problem happening at the same time was the drum filling with water when the appliance was not in use. I thought the two problems were related, but upon further research decided that the most likely cause was a faulty water inlet valve.
I order the parts from Part Select and I could not believe how fast the shipping was. I just ordered regular ground but the parts got here in a couple of days.
The repair was easy. Remove four screws (need a star bit) from the top lid of the washer and remove the cover. The flowmeter and the water inlet valve sit right on top of the washer. Even with the lousy set of pliers I used, removing the clamps and disconnecting the hoses on both parts was easy off and easy back on. I had more trouble with the electrical leads on the water inlet, only because they were on so securely and I didn't want to rip out the wiring.
All together the repair for both parts took about 30 minutes.
Make sure you turn off the water supply and be ready to mop up a little excess water from the water supply lines when you disconnect them from the washer's water inlet valve.
Other Parts Used:
Water Inlet Valve
  • William from Longwood, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
29 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
FH code-4 minutes into cycle
remove 3 screws of top panel at rear. slide top to rear 1/2 inch and lift up. disconnect wire to flometer, remove clamps on hoses and remove, reverse to install. did not fix problem. ck'd screens at fill valves. ordered new fill valves--problem solved. solenoids must not have been opening up all the way.
  • robert from LITLE RIVER, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was giving F20 F35 and SUDS error messages
After replacing the Water Inlet Valve and Flowmeter the F20 error message stopped. However, after ordering and replacing the Water Pressure Sensor the F35 error message and the SUDS error message stopped and the washer is finally working.
Other Parts Used:
Water Inlet Valve
  • Amie from Port Clinton, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
17 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Constant washer Faulting with a FH fault code
This washer had been faulting since it was 1 year old but it only happened 1 to 2 times a year. As the fault problem became more often, I realized it was a hardware or computer malfunction. But what was the problem? Well the problem always was a faulty flow meter. I replace the valve and the flow meter. But I tested the flow meter several times.-- I replaced the flow meter and the valve. And for once in 5 years it did not fault.
Other Parts Used:
Water Inlet Valve
  • Bruce from Salisbury, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Socket set
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Low water intake pressure error
Serviceman had previously replaced the hot and cold inlet valves, but the low pressure error persisted. Rather than cough up another $130 for the serviceman to return, plus parts and time, I decided to order the replacement flowmeter from PartSelect.

Unplug power and turn off water. Top of machine comes off by removing three screws at top rear; use socket, spanner or T20 driver. Unplug electric sensor from flowmeter. Old unit is removed, and new one connected to water line by squeezing spring-clips with a pair of flat nose pliers. Reconnect electric sensor.

Great move, easy, and saved myself the thick end of $200.
  • John from Rye Brook, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
12 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
error F28 in mid cycle
check error code : no water flow
pulled hoses [hot& cold] to clean screen in line.
pulled flow meter out from under top of hood to clean and check free wheel movement inside.
still error code F28 in mid wash cycle. called in and talk with service: he explained that hot& cold water valve was opening to slow or not enough for flow meter to read full presure. I replace water valve and flow meter. washer is doing fine. [I was getting readly to go in futher down the line and get new controler. talking to service stop me from spending a lot of money. THANK YOU
Other Parts Used:
Water Inlet Valve Clamp
  • Nicholas from Boothwyn, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Displayed F and H alternately
Brother who used to sell appliances opened the washer door and read the booklet inside the washer telling him the part necessary to repair the problem. $33/00 for the water flow meter Part and shipped in next morning and arrived overnight. Excellent service for only $7.00 shipping. Highly recommend this place for parts. This was after a couple of days searching the internet for those with the same problem and not receiving and exact part to fix the problem
  • LAVERNE from NIANTIC, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F-20 Error Code
Take off top of washer and the flowmeter is in the back lefthand corner on the top of the washer. Replaced the water level switch on the top righthand of the machine also. Got about 150. 00 Total invested w/service call from local tech. F-20 has not came back yet. I hoped it fixed it washer is only 3 yrs. Old. -Gd
  • GARY from CLARKSVILLE, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.7
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748313
Manufacturer Part Number: WPW10110225
Brand
Model Number
Description
Kenmore
11042822200
Washer
Kenmore
11042822201
Washer
Kenmore
11042822202
Washer
Kenmore
11042822203
Washer
Kenmore
11042824200
Washer
Kenmore
11042824201
Washer
Kenmore
11042824202
Washer
Kenmore
11042824203
Washer
Kenmore
11042826200
Washer
Kenmore
11042826201
Washer
Kenmore
11042832200
Washer
Kenmore
11042832201
Washer - Kenmore Washing Machine
Kenmore
11042834200
Washer
Kenmore
11042834201
Washer
Kenmore
11042836200
Washer
Kenmore
11042836201
Washer
Kenmore
11042922200
Washer
Kenmore
11042922201
Washer
Kenmore
11042922202
Washer
Kenmore
11042922203
Washer
Kenmore
11042924200
Washer - Kenmore Washing Machine
Kenmore
11042924201
Washer
Kenmore
11042924202
Washer
Kenmore
11042924203
Washer
Kenmore
11042926200
Washer
Kenmore
11042926201
Washer
Kenmore
11042926202
Washer
Kenmore
11042926203
Washer
Kenmore
11042926220
Washer - WASHER
Kenmore
11042932200
Washer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service