This part is usually located in the bottom of the washer next to the drive motor. It is used to control the drive motor speed as well as the direction for the spin and tumble actions during the cycle.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
Part# WPW10374126 replaces these:
AP6020609, W10245123, W10374126
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
April 30, 2018
When replacing the motor control unit can it be accessed from the rear or is the easiest access via the front panel... my front panel is one whole piece not a two piece set up..
For model number WFW94HE
Hi Steve,
Thank you for your question. To access the motor control board, you will need to remove the back panel to gain access to it. It should be down on the bottom left corner. I hope this helps. Thank you and have a great day!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Shane
July 11, 2019
The washer starts a selected cycle and shows remaking minutes but does nothing. A code F0 E0 appeared one time, but can not see this code again.
For model number WFW97HEXL2
Hello Shane, Thank you for the question. The F0 E0 normally indicates an issue with the boards communication. I suggest unplugging the appliance and opening up the control panel. Disconnect all the connectors and making sure there is no damage and then reconnecting them all securely. After the appliance it plugged back in and if the same issues occur, you may have a defective board. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Barkley
March 9, 2023
The machine acts normal until you hold start. The door locks and you can hear the relays o. The board clicking, nothing else happens. Eventually it will give the code F6e2. Then it takes a long time to unlock the door. I tried unplugging for several minutes and then restarting. Same result 3 times in a row. What does this code tell us?
For model number Wfw97hexL2
Hello Barkley, thank you for reaching out. The error code F6E2 indicates there is an issue with the appliance control unit, user interface, or associated wiring. We recommend replacing the control board, part number PS11753928, to fix the issue. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
July 5, 2024
I have error codes of E01 and F06. The washer is maybe 6 years old and does not get used daily? What can the problem be? It won’t start, but power is fine. When I hit the start button, no water comes in and it never comes on, just a click but the water doesn’t start.
For model number WFW94HEXW2
Hi James, thanks for asking us! The E01/F06 error codes indicate a communication error between the central control unit and the motor control unit. We recommend inspecting the wiring harnesses between these two boards and replacing any that show signs of wear or damage. If the harnesses are good, it is most likely that the motor control may need to be replaced. We hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Washer-Circuit-Boards-and-Touch-Pads.htm"},{"position":3,"name":"WPW10374126","title":"WPW10374126","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout