Models > WF231ANW

WF231ANW Samsung Washer - Overview

Models starting with WF231ANW

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Inlet Hose - 5 FT – Part Number: WP89503
Inlet Hose - 5 FT
★★★★★
★★★★★
(3)
PartSelect #: PS11746820
Manufacturer #: WP89503
This hose can handle hot or cold water and is five feet long.
$21.57
  In Stock
Washer Hex Bolt – Part Number: DC60-40137A
Washer Hex Bolt
★★★★★
★★★★★
(1)
PartSelect #: PS4205366
Manufacturer #: DC60-40137A
This part is used for the shaft on the rear of the tub and is sold individually. The head bolt is part of the spider arm assembly, and they are generally changed at the same time. If you are replacing...
$14.27
  In Stock
Affresh Washing Machine Cleaner - 3 pack – Part Number: W10135699
Affresh Washing Machine Cleaner - 3 pack
★★★★★
★★★★★
(2)
PartSelect #: PS1960673
Manufacturer #: W10135699
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
$12.62
  In Stock
Outer Door Boot Seal Clamp Wire – Part Number: DC97-04973B
Outer Door Boot Seal Clamp Wire
★★★★★
★★★★★
(3)
PartSelect #: PS4218211
Manufacturer #: DC97-04973B
This is an outer seal clamp for the washer door boot of your Samsung washing machine. This clamp tightly seals the boot of the drum within the door of the washer to prevent leaks. This clamp is made o...
$17.87
  In Stock
Water Inlet Valve – Part Number: DC62-30314K
Water Inlet Valve
★★★★★
★★★★★
(2)
PartSelect #: PS4209100
Manufacturer #: DC62-30314K
One solenoid valve for hot water
$89.87
  In Stock
Screw - Tapping – Part Number: 6002-000213
Screw - Tapping
PartSelect #: PS4133148
Manufacturer #: 6002-000213
$4.67
  In Stock
Door Diaphragm – Part Number: DC64-00802B
Door Diaphragm
★★★★★
★★★★★
(3)
PartSelect #: PS4210921
Manufacturer #: DC64-00802B
This is a door diaphragm, also commonly known as a door boot seal, for a washer. The boot is fitted between the washer door and the tub to prevent leaking while the appliance is in use. It is made of ...
$189.47
  In Stock
Assembly Fixer Tub – Part Number: DC97-14489R
Assembly Fixer Tub
★★★★★
★★★★★
(1)
PartSelect #: PS16224595
Manufacturer #: DC97-14489R
Shipping bolts are installed through the back of the washing machine, and hold the wash tub and basket in place while your washer is being transported. The tub suspension holds the tub correctly in pl...
$38.27
  In Stock
Water Inlet Valve – Part Number: DC62-30312J
Water Inlet Valve
PartSelect #: PS4209090
Manufacturer #: DC62-30312J
$134.27
  In Stock
Drain Pump – Part Number: DC31-00054D
Drain Pump
★★★★★
★★★★★
(2)
PartSelect #: PS4204640
Manufacturer #: DC31-00054D
This is the drain pump assembly for various models of Samsung washing machines. The drain pump is used to remove any water from the washer after it has completed its washing cycle. If your washer stil...
$57.47
  In Stock
Motor Bolt – Part Number: DC97-02412A
Motor Bolt
PartSelect #: PS4217876
Manufacturer #: DC97-02412A
Assembly BOLT;SWF-P12,MOTOR/
$23.87
  In Stock
Shock Absorber (Rear) – Part Number: DC66-00531B
Shock Absorber (Rear)
PartSelect #: PS4212251
Manufacturer #: DC66-00531B
$59.87
  In Stock
View More
Back to Top

Common Symptoms of models starting with WF231ANW

[Viewing 2 of 2]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Water Inlet Valve

Replacing the Water Inlet Valve

Replacing the Inlet Hose - 5 FT

Replacing the Inlet Hose - 5 FT

Replacing the Water Inlet Valve

Replacing the Water Inlet Valve

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Leaking water inlet hoses.
Removed the old hoses and screwed on the new hoses.
Parts Used:
Inlet Hose - 5 FT
  • Helen from NASHUA, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water level was lower than normal.
First unplug or turn off thee circuit breaker. Then remove the two screws to the top cover. Slide the cover back about three inches then remove the cover. Next take out the screw to the old sensor. Then unplug the electrical connection by squeezing and the pulling to disengage. Now set the old unit aside. You then grad your eight inch wire tie and hold the with flat side to the right and just to the right of the screw hole for the bracket is a square hole. Feed to wire tie into the square hole with your left hand then loop down left side of the end of new sensor and back up threw the square hole and tighten with the pliers. Your new sensor will be positioned just like it was mounted to the metal bracket. And pretty ridged. Now connect the vacuum hose and electrical connector.
Read less
Parts Used:
Water Level-Pressure Sensor
  • Fredric from ROCKMART, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer making noise a snow smoking.
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
Parts Used:
Washer Hex Bolt
  • Samuel from NEEDVILLE, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
9 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top