SRD526TW Amana Refrigerator - Parts

Replacement Ice Maker

★★★★★

★★★★★

(150)

This ice maker (Ice Maker Assembly, Refrigerator Ice Maker) produces ice cubes that are ejected into the storage bucket. It is located in the freezer section of your appliance, mounted on the freezer ... Add to cart

Icemaker Control Assembly

★★★★★

★★★★★

(26)

The “Icemaker Control Assembly” (Module & Motor Assembly, Ice Maker Control Module, Icemaker Module, Refrigerator Ice Maker Module) is what controls the actions of your ice maker. The control turns th... Add to cart

Refrigerator Door Switch

★★★★★

★★★★★

(83)

Door switch turns the light off when you close the door. Add to cart

Door Closure Cam Kit

★★★★★

★★★★★

(17)

This door closing cam kit is intended for use on the bottom of your refrigerator and freezer door hinges. The cam helps close the doors and to lifts them slightly when opened. If your door will not op... Add to cart

Door Switch

★★★★★

★★★★★

(35)

This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ... Add to cart

Screw

★★★★★

★★★★★

(6)

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch... Add to cart

Screw, 8/18 x 3/8

★★★★★

★★★★★

(2)

This screw is sold individually. Add to cart

Ice Maker Helix End Cap - white

★★★★★

★★★★★

(9)

This helix end cap is almost four inches in diameter. It is all white in color and is made of plastic. This end cap is used in a refrigerator's icemaker. Add to cart

Water Fill Cup and Bearing

★★★★★

★★★★★

(10)

This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ice maker is leaking, ... Add to cart

Refrigerator Kick Plate Grill Clip This refrigerator kick plate grill is sold individually. Order two if you need to replace both clips. *Please note, if you are ordering the kick plate, check with your model number as these parts may be included. Add to cart

Cycling thermostat

★★★★★

★★★★★

(1)

The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ic... Add to cart

Ice Maker Auger and Crusher Blade Assembly

★★★★★

★★★★★

(7)

This is the replacement ice maker auger and crusher blade assembly for your refrigerator. It is approximately 15 inches long and 7 inches wide. The ice maker auger sits within the ice maker assembly a... Add to cart