Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
E-24
Removed old discharge pump and replaced it with the new one. After four attempts the dishwasher worked once. This cycle continued for the next 3 attempts then it stoped all together. Ordered the sensor, installed it snd the dishwasher still doesn’t work! Now what do I do???
Remove lower panel TURN OFF POWER AT BREAKER Remove water line Remove the screws on bottom left of washer to remove solenoid valve Pull out solenoid valve carefully there is a wire plugged into it, far enough to remove clamp on the hose Remove valve far enough to disconnect wire Order correct valve assembly Reinstall in reverse order
dishwasher not emptying tub, dirty dishes when the dishwasher said the cycle was done
easy repair, but the check valve wasn't the problem, it was the float switch that isn't on the tech sheet in the dishwasher or mentioned as a possible culprit anywhere I could find on the internet