Models > RY4CPH > Instructions

RY4CPH Ryobi Trimmer - Instructions

All Instructions for the RY4CPH
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replaced straight shaft, and the gear head.
Removed the 2 bolts holding the gear head to shaft. On my model I had to remove the complete trimmer head, then using 2 wrench take the trimmer head adapter off the gear heD. One video showed simply putting a screwdriver in the notch behind trimmer head and unscrewing complete head. Mine of course was slightly more involved but still quite easy once I saw what needed to be done.
Parts Used:
Straight Shaft Assembly
  • Tim from HOLLISTER, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Parts Used:
Carburetor
  • MIKE from LOXAHATCHEE, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RY4CPH
1 - 2 of 2
Back to Top