RCC-1010 (P85729-1S) Amana Range - Instructions
Sections
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the RCC-1010
oven light burnt out
1. Unscrewed glass cover on bulb 2. Removed old bulb 3. Screwed in new bulb 4. Replaced glass cover 5. Mixed drink & baked cupcakes
Parts Used:
William from Schwenksville, PA
Total Repair Time:
Less than 15 mins
3 of 9 people
found this instruction helpful.
Thank you for voting!
Magnetron shorted out blowed 15 amp fuse
removed cover of microwave, replaced fuse checked for short at plug with volt ohm meter, there was a short at the plug then checked magnetron for short and there was a short at the magnetron, the cap and diode checked good. replaced magnetron IT IS WORKING GREAT !!
Parts Used:
Duane from Jacksonville, FL
Difficulty Level:
Very Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
1 of 3 people
found this instruction helpful.
Thank you for voting!
Block broke
Unplug power cord, remove wires from block. take 2 screws out. replace with new block about 15 mins. Done
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
1 of 4 people
found this instruction helpful.
Thank you for voting!
light bulb went out in my oven
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 7 people
found this instruction helpful.
Thank you for voting!
replaced oven lightbulb
peggy ann from forest city, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Light burned out in upper oven
Screwed in light bulb and glass protector
Parts Used:
Shirley from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Bulb Replacement
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
broiler pan missing
ordered new broiler pan
Parts Used:
RAYMOND from JACKSONVILLE, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
circuit breaker blew
I went to the source of power on the stove and noticed one of the terminals had come loose from the terminal block and had shorted out against the cover of the terminal junction. After prying the loose terminal off cover I ordered new terminal block and received it the 2nd day. I removed the old terminal block and replaced the part in about 10 minutes..Thank you Parts Select for your easy to find diagrams and quick delivery.
Parts Used:
Richard from Sarasota, FL
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Thank you for voting!
Light bulb failure
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Parts Used:
Grant from Alexandria, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
range installer broke a screw off & busted the plastic piece
Had to screw off old terminal block & screw on new one
Parts Used:
Christina from West Des Moines, IA
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Thank you for voting!
All Instructions for the RCC-1010