Models > LSE7800AEE > Parts

LSE7800AEE Maytag Washer Dryer Combo - Parts

PartSelect #: PS11738859

Manufacturer #: WP210684

The leveling leg pad or foot pad fits over the leveling leg on your washing machine. The foot pad is designed to protect your floor and keep the washing machine level and in place. This foot pad is ju...

$15.28

Idler Shaft Retaining Ring

PartSelect #: PS11741848

Manufacturer #: WP354987

This idler shaft retaining ring is well under an inch long and is made of metal.

$14.40

Tub Bearing Kit

★★★★★

(1)

PartSelect #: PS2347235

Manufacturer #: 6-2040130

This kit is used on 2-belt washers. It is recommended to change the seal kit at the same time. The tub bearing kit fixes issues with leaking, loud noise, excessive shaking/moving or if your pump is no...

$55.70

Roller Shaft Hex Nut

PartSelect #: PS11741054

Manufacturer #: WP33001443

This roller shaft hex nut measures well under an inch long. It is made of metal and is used for Maytag brand clothes dryers.

$5.37

Adjustable Leveling Leg

★★★★★

(1)

PartSelect #: PS2021026

Manufacturer #: 22003428

If your washer shakes or vibrates loudly when it reaches its max speed, make sure the 4 levelling legs are even. Adjust the legs so that the machine is level, and tighten the locking nuts on the legs ...

$18.51

Siphon Break Connector Kit

★★★★★

(14)

PartSelect #: PS2017342

Manufacturer #: 206638

This plastic siphon break comes with a metallic clamp and gasket. It is used with many washing machines.

$73.18

Idler Arm Screw Sleeve

★★★★★

(3)

PartSelect #: PS11740802

Manufacturer #: WP315772

This sleeve is less than an inch in diameter. It is made of metal and is intended for use with the screw that holds the idler pulley of your clothes dryer.

$13.64

Outer Tub to Pump Hose

★★★★★

(17)

PartSelect #: PS11738880

Manufacturer #: WP213045

This hose connects the outer tub to the pump of your washing machine. It is twelve inches long and all black in color. This hose is made entirely of rubber.

$42.90

Hose Clamp

★★★★★

(2)

PartSelect #: PS11740613

Manufacturer #: WP285655

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...

$11.12

Damper Pad Kit

★★★★★

(11)

PartSelect #: PS2017036

Manufacturer #: 203956

This damper pad kit is used for base support. It comes with three six inch damper pads, two little tubes of lubricant. NOTE: This part will need adhesive to stick it in place.

$45.33