KHMS2056SSS3 KitchenAid Microwave - Instructions
Sections
Manuals
Parts
Questions & Answers
Symptoms
Instructions
All Instructions for the KHMS2056SSS3
COVER BURNED
REMOVED OLD AND REPLACED WITH NEW
Parts Used:
Aaron from HIGH POINT, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 people
found this instruction helpful.
Thank you for voting!
machine was dead.
After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "Part Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
2 of 3 people
found this instruction helpful.
Thank you for voting!
my pan that browns the meat started to bubble and peal
I really did not have a repair on the microwave just a replacement of the browning pan
Parts Used:
Lillian from SAN JOSE, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 person
found this instruction helpful.
Thank you for voting!
Loud noise
Changed out turntable motor
Parts Used:
Cynthia from DRIPPING SPGS, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 person
found this instruction helpful.
Thank you for voting!
lost the driver
just insert it in the right side
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 of 2 people
found this instruction helpful.
Thank you for voting!
Microwave had no electrical
I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.
Parts Used:
Larry from HARKER HTS, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 of 2 people
found this instruction helpful.
Thank you for voting!
Lost spring that holds filter in hood that was lost when cleaning it.
simply removed the filter casing from the microwave, then removed both filters and inserted the spring after bending it slightly.
Parts Used:
Raymond from Mechanicsville, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 people
found this instruction helpful.
Thank you for voting!
it was working fine and it stopped order a fuse and it wasn't the problem
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
0 of 2 people
found this instruction helpful.
Thank you for voting!
Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!
Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!
Parts Used:
Stephen from SPRINGFIELD, WV
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
4 of 16 people
found this instruction helpful.
Thank you for voting!
light bulbs nedd to repace it.
Took the the want burned out , and put the new ones.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
45 of 196 people
found this instruction helpful.
Thank you for voting!
Light Burned Out
Followed the instruction booklet that came with the microwave. Very easy.
Parts Used:
Patti from Coarsegold, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
Dirty filters
Removed the dirty ones and put in the new ones. This was really not a repair. No tools needed.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
need new filter
replaced old filter
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
Bulb Finally went out
Used an apex bit unscrewed the fittingand down came the light cover. Pulled the old bulb out and had to use a flashlight to line the prongs up to install the new one. Whileeverything was down used an oven cleaner to degrease and clean EVERYTHING. You wouldn't beleive how much grease and debris will accumulate in 5 years. And I only fry bacon once in a blue moon. All in all it was simple to order, clean, and repair.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
Light burned
Unscrewed the lens cover anbd inserted the new bulb. Put the cover back on and there was light!
Parts Used:
Jennifer from Red Oak, IA
Total Repair Time:
Less than 15 mins
Thank you for voting!
All Instructions for the KHMS2056SSS3