Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace Bad Switch
Pry old switch and pull out. Disconect two wires. Put two wires on new switch, must be inserted right and connections not loose. Put switch in, making shure wies do not come off and snap in place
tricky part was removal of the old drawer rails. they have a little nub that sides in but does not slide out (the nub is a small triangle piece) so easily. needed to revmove the nub by use of a chisel (sharp knife would work). once that nub was gone the old rail slipped out and the new one slid right in.
Broken for over 5 years!!! lost power in a storm freezer empty got model # went to google found partselect very easy to order. Parts came in less than 2 days, popped one in on each side very easy!!! very very happy!
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights were staying on (50 watts of heating). Replaced the switch and the frig started working like new.
the original slide rail for the meat drawer in the fridge broke
I took the original shelf out of the fridge with the brackets and the slide rail attached. The most difficult part was actually dismounting the slide rail from the bracket so I could replace it. I did this by leveraging the rail away from the bracket with a screwdriver so it could move freely and then banged it out. Once the old slide rail was off I just snapped in the new piece, screwed the wheel from the old rail onto the new one.
Took both left(broken one) and right brackets off. They come out opposite what you may think. You must pull down on them and then out. Previous post alerted me to pull down, and he was right. Pliers helped give me leverage.
I put the shelves into bracket on both sides before inserting them back into position. Popped right in with a firm push.
A very cold and brittle switch in a 17 year old fridge. Used screwdrivers to pry out with some resistance Had to cut the molded plug in half and split wires, because replacement contacts were farther apart than the original. End result, works great.
Good news/Bad news story. One of your parts view showed the side rails without the drawer rollers another showed the rails with rollers. I ordered the rails expecting that they would come with the rollers attached. They did not so I had to place a second order for two rollers and two screws. As I live in CA, delivery was just a day for first order, but for second I ordered on Sat, delivery was on Tuesday. My complaint was double shipping and handling so total was almost $50.for two very simple items.
Took out lower shelf. Unscrewed screws holding two broken shelf supports and removed broken supports. Replaced with new supports and screwed in the screws. Nothing to it.
Internal light did not come on each time the door was opened.
After disconnecting the electricity. I followed the instructions as indicated in the "HOW TO" article on the website. I used a steel putty knife and pried the light switch out of its retaining hole. I worked the right side the most since this is the side with the retaining clip. After I removed the switch I transferred the two electrical outlets to the new switch and easily snapped it into place. Engaged the electric power and tested the switch.
Was amazed that I could find parts for a model more than 10 years old. Hardest part was figuring out which was the left rail and which was the right. Then it was a snap with no tools
My husband did it in less than two minutes. He removed the old part using a small screwdriver and simply inserted the new part. It was the easiest, quickest repair we ever did! PS The part arrived only a couple of days after ordering it. The service was wonderful!
