Models > GLM25WGSAGS > Instructions

GLM25WGSAGS General Electric Refrigerator - Instructions

All Instructions for the GLM25WGSAGS
106 - 107 of 107
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Flapper in door for ice dispenser would not close.
I repaired IAW the PartSelect video. Very easy. One thing that should be mentioned in the troubleshooting process, is to check the retention spring on the flapper. That spring could come off and also cause the flapper not to close.
Parts Used:
Dispenser Door Solenoid Assembly
  • Clyde from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker door was not closing. Snow piled up enough to fall when door was opened.
Turned power off at breaker. Took off front panel on the door. Unscrewed the panel where the electrical parts were plugged in. Then you could unscrew the old solenoid assembly and install the new one. Cleaned around the Ice shute since some mold was there. Put all back together. We watched the video from you tube about 5 times!!
Parts Used:
Dispenser Door Solenoid Assembly
  • Bonnie from Savannah, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GLM25WGSAGS
106 - 107 of 107
Back to Top