DDG7900N General Electric Dryer - Parts

Drive Belt

★★★★★

★★★★★

(25)

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges. Add to cart

Door Latch

★★★★★

★★★★★

(14)

This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ... Add to cart

Lint Filter with Frame

★★★★★

★★★★★

(18)

The lint filter and frame for your dryer traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint filter is cracked or clogged, or the dryer takes too long to dry...

Idler Pulley Wheel

★★★★★

★★★★★

(1)

This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum. Add to cart

High Limit Thermostat

★★★★★

★★★★★

(4)

With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device, will kick back in w... Add to cart

Drive Motor Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered. Add to cart

Door Switch This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

Blower Wheel

★★★★★

★★★★★

(1)

This wheel attaches to the motor. Add to cart

Timer Knob This knob accepts a D-shaped shaft.

Motor Pulley with Screws Add to cart

Start Switch

Heater Coil Restring Kit - carries 250 volts This heating element coil restring kit is intended for use with many of GE's brands of electric clothes dryers. It carries 250 volts, and includes two coils.