DBLR453GT0WW Dryer - Parts

Door Strike

★★★★★

★★★★★

(8)

TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the... Add to cart

Rear Drum Bearing

★★★★★

★★★★★

(2)

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible. Add to cart

M-Series Primary Dual Coil Gas Valve

★★★★★

★★★★★

(2)

This 'M' series coil is both a boosting as well as a holding coil. It has three terminals. Add to cart

M - Series Secondary Coil - 2 Terminals

★★★★★

★★★★★

(8)

This part is the replacement main valve coil for your dryer. It is black and white in color and has 2 terminals. It is approximately 1 inch long and 1 inch wide. The main valve coil opens the gas valv... Add to cart

IGNITER

★★★★★

★★★★★

(3)

NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only. Add to cart

Adjustable Leveling Screw

★★★★★

★★★★★

(2)

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able... Add to cart

Front Drum Bearing This front dryer drum bearing does not come with slides. Add to cart

Dryer Door Handle

★★★★★

★★★★★

(9)

Almond in color. Add to cart

Screw

★★★★★

★★★★★

(1)

This screw is sold individually. Add to cart

Air Duct Felt Seal

★★★★★

★★★★★

(1)

If your dryer is making a squeaking noise this seal may need to be replaced.

Drive Motor Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered. Add to cart

Door Switch This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.