All Installation Instructions for Hotpoint Refrigerator CTE24GASJRWH

Bar end cap broke

Just snapped in.

Parts Used:

Door Shelf Retainer Bar End Cap - Left or Right Side

Gery from Tavares, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

light switch quit working

removed the inside fridge electrical panel and swapped switches

Parts Used:

Light Switch

David from Simpsonville, SC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Broken side rail to vegetable bin

Took the old frame apart - two screws - replaced broken side rail and put frame back in frig. replaced glass shelf and bins. Frig good as new. 15 minutes. Pretty good for and 81 year old lady.

Parts Used:

Vegetable Drawer Slide Rail - Right Side

Eleanor from Elko, NV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

Refrigerator and freezer too warm

1) This is a built-in refrigerator with the compressor, coils, etc. at the top. Turn off the breaker to the fridge. 2) Remove the front panel off the top (just push up and pull out). 3) Removed 2 screws to the old timer and carefully remove the plug. Plug the new timer in and screw in. 4) Since our fridge was heavily frosted up, we moved everything to another refrigerator and coolers and kept the refrigerator off until all panels were room temperature. 5) If you haven't cleaned the coil in a while, vacuum it with a soft brush attachment. 6) Turned back on and the refrigerator is cooler than ever!

Parts Used:

Defrost Timer - 120V 60Hz

Paul from Andrews, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

sticky switch

easy pry out, disconnect wiring, connect on new switch and press in switch.

Parts Used:

Light Switch

ANTHONY from NEW EGYPT, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

drawr slide broke

followed instructions from video on your site

Parts Used:

Vegetable Drawer Slide Rail - Left Side

Beverly from St Louis, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Broken slide rail

Your online helpful hints made it easy as pie.

Parts Used:

Vegetable Drawer Slide Rail - Left Side

John from Sahuarita, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

defrost timer was bad

repalaced the old one with the new one. easy

Parts Used:

Defrost Timer - 120V 60Hz

Reese from Coconut Creek, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Slide rail was broken

Unscrewed the old rail, cleaned everything and installed the new rail

Parts Used:

Vegetable Drawer Slide Rail - Right Side

Lisa from Pawling, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

right side slide rail broken

pull the front cover off, take the two screws out and the side rail comes right off, put the new one in place, put the screws back in and bang!.....all done. Took longer to take the stuff out of the fridge than to make this repair.

Parts Used:

Vegetable Drawer Slide Rail - Right Side

Keven from Fleming Island, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

broken rail

Just follow instructions

Parts Used:

Vegetable Drawer Slide Rail - Left Side

Vegetable Drawer Slide Rail - Right Side

leonard from albany, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

light would not stay on

First I flipped breaker to off position for refigerator, Pulled down on socket and broke it free. Then took needle nose piars to pull wire and plug out from hole, so I could conect to new light socket then snaped it in place . Hardest part was getting wire and plug out of hole.

Parts Used:

Light Socket

Kenneth from Leavenworth, KS
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

needed new light socket

Pulled out old socket.pushed in new one.

Parts Used:

Light Socket

Charles from Williamsburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Office refrig. A rat chewed thru.drain part.

Sears told me the part was no longer available. I came to your web site and then called your customer service. A very nice customer service lady helped me find the part. Very simple to pull the old one off and reinstall the new one with a rat trap behind the unit. Just in case it came back. Could have been a client but probably was a rat. Thanks for the great service.

Parts Used: