CRL5300BXW Maytag Range - Instructions
Sections
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the CRL5300BXW
I needed a broiler pan
I took the broiler pan out of the shipping container and put it in the oven.
Parts Used:
Rhoda P. from Secaucus, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 9 people
found this instruction helpful.
Thank you for voting!
The oven bottom was warped and could not be positioned properly in the oven.
Removing the old oven bottom was easy...as it was already outside of its slots. Installing the new one was pretty easy. I placed the oven bottom in the front slots first...then the rear slots...no tools necessary.
Parts Used:
Total Repair Time:
15 - 30 mins
1 person
found this instruction helpful.
Thank you for voting!
Simply remove and install new parts
Overall, it was painless and easy with zero problems
Parts Used:
Jacob from LITTLE CANADA, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 person
found this instruction helpful.
Thank you for voting!
Oven Racks were old
Replace the racks. No special instructions.
Parts Used:
Sandra M from DISTRICT HTS, MD
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 person
found this instruction helpful.
Thank you for voting!
35 year old range. grates too dirty to clean. Parts Select had exact replacement grates. Perfect fit.
Easy, removed from box, put in place on range. Happy customer. Good company to find exact replacement parts.
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 person
found this instruction helpful.
Thank you for voting!
1960's oven door gasket fell apart, actual gasket not available any more
Chose rubber flexible gasket with metal tabs. cut to size. unscrewed metal bracket on inside oven edge on 3 sides, slipped metal tabs between oven and metal and screwed back in. Done! Not a perfect fit but pretty good - better than no gasket.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 person
found this instruction helpful.
Thank you for voting!
My oven door seal had dried rotted
I took pliers to get the old one off, and popped the new one back in its place, and it fit perfect.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 person
found this instruction helpful.
Thank you for voting!
Old seal breaking off oven door. Oven not baking food well, wasting heat and fuel.
Used pliers to remove clips and old seal. Snap in new seal. DONE! Less than 5 mins.
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 person
found this instruction helpful.
Thank you for voting!
Original rack had melted plastic on it.
Removed the original rack. Checked dimensions, installed the new rack.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 person
found this instruction helpful.
Thank you for voting!
Thermostat bulb was hanging loose
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Parts Used:
Willi from Old Saybrook, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 5 people
found this instruction helpful.
Thank you for voting!
The floor panel of the oven was pocked and in bad shape
I found the panel on the innernet, ordered it and when it arrived I removed the old one and replaced it with the new one.
Parts Used:
Roger from San Juan Capistrano, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 6 people
found this instruction helpful.
Thank you for voting!
thermostat temprature bulb hanger clips
snaped them into oven cavity attached temp bulb job complete
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 4 people
found this instruction helpful.
Thank you for voting!
Rubber seal was broken
Broke the same day I installed it
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
Door seal was pulled out by grandson.
finished removing door seal, used pliers to remove old securing studs. positioned new seal and pushed securing studs into existing holes and was done.
Parts Used:
Michael P from Hickory Hills, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
As easy as it could be
I have worked in maintenance field most of my adult life and all aspects and to change the oven door gasket was no challenge what so ever. It took longer to find my needle nose pliers to remove the old gasket clips and then re-install the new gasket. Maybe 10 minutes total
Parts Used:
Phillip from Twentynine Palms, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
All Instructions for the CRL5300BXW