Models > 82JN-2K > Instructions

82JN-2K Magic Chef Cooktop - Instructions

All Instructions for the 82JN-2K
31 - 33 of 33
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
turn on stove no spark to ignite the flame
I used the advise given in the website and it was very informative- the part was exactly where the folks on the website said it would be and although it wasnt the actual maytag part it was easily fitted by using the wire splices i mentioned and it was shipped quickly The whole process took less the 30 min once received. thank you for a very useful site.
Parts Used:
Spark Module - Surface Burners
  • joseph from stratford, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners would no longer work without using a match or lighter
I replaced all the burner switches as well as the spark ignition module. It was necessary to solder small terminals to use the existing wires with the new spark ignition module. Otherwise, this was a pretty straightforward job. My wife, an excellent cook, is now even happier than usual.
Parts Used:
Burner Spark Ignition Switch Spark Module - Surface Burners
  • Mark from Hastings on Hudson, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
3 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front burners would not light.
First, unplugged the cooktop from outlet and shut off gas. Then, removed burner assembly then located and removed existing spark module. Installed new spark module kit, reassembled burner assembly and then plugged unit into electricity and turned gas on. Was rewarded when testing burners with an instant ignition.
Parts Used:
Surface Burners Spark Module Kit
  • Jeffrey from Columbus, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 82JN-2K
31 - 33 of 33
Back to Top