10639422990 Kenmore Refrigerator - Instructions
Sections
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the 10639422990
Replace Bad Switch
Pry old switch and pull out. Disconect two wires. Put two wires on new switch, must be inserted right and connections not loose. Put switch in, making shure wies do not come off and snap in place
Parts Used:
carlos from haverstraw, NY
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Thank you for voting!
Broken light switch
Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.
Parts Used:
George from North Scituate, RI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
Lights didn't always come on when was opened
Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
The fill tube froze and cracked
It was easy and quick to find the part that I needed, order it and have it shipped. The fill tube arived in 3 days and was easy to replace.
Parts Used:
Phillip from Sellersburg, IN
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Wrench (Adjustable)
0 of 1 people
found this instruction helpful.
Thank you for voting!
Part broke.
Replacement partfit perfectly.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
light staying on
A very cold and brittle switch in a 17 year old fridge. Used screwdrivers to pry out with some resistance Had to cut the molded plug in half and split wires, because replacement contacts were farther apart than the original. End result, works great.
Parts Used:
Cecelia from Beaver Dam, WI
Total Repair Time:
15 - 30 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
19 year old light switch broke
Great service. Unpluged old switch and pluged in new one. Works great
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
thread broke
Unscrew broken piece, pull it out and then insert new one, security it in place and connect water line again, make sure It's thight check for leaks and done
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
0 of 1 people
found this instruction helpful.
Thank you for voting!
light bulb went out in my oven
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 7 people
found this instruction helpful.
Thank you for voting!
Light burned out in upper oven
Screwed in light bulb and glass protector
Parts Used:
Shirley from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
replaced oven lightbulb
peggy ann from forest city, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
non-functioning refrigerator lite switch
My owners manual said to unplug fridge from elec outlet, use a kitchen knife to gently pry off the switch plate (manual had a pictoral example), unclip the two wire, replace with on new switch and replace the switch. Close door and plug back in. Open door to check that the lite works. Walla! It did. Thanks! Sincerely, Ron Marshall, Billings, MT
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Wrench set
0 of 2 people
found this instruction helpful.
Thank you for voting!
light switch would not work
Popped the old one out with a kitchen knife and popped the new one back in. It tool less than 15 seconds!!
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 2 people
found this instruction helpful.
Thank you for voting!
Water Line To Ice Maker Broke
Looked up the process on you yube and watched the repair video from the parts website
Parts Used:
Total Repair Time:
Less than 15 mins
0 of 2 people
found this instruction helpful.
Thank you for voting!
The light went out
I pried the old one out with a screw driver and pushed the new one in. I expected instructions in the box it came in but there were none.
Parts Used:
Total Repair Time:
Less than 15 mins
0 of 2 people
found this instruction helpful.
Thank you for voting!
All Instructions for the 10639422990