Control panel just stopped working
Since the control panel is an all-in-one "plug and play" item, it is as straightforward as removing the torx head screws on the inside of the door, disconnecting and removing the old panel, plugging i...read more

Lights flashing on dishwasher console. Dishwasher fails to start.
1st session: Removed input 120 volt power to dishwasher. Removed 6 ea. console mounting screws. Cleaned control console ribbon cable female plug and control board male pins with denatured alcohol. ...read more

Control panel buttons were worn out, circuit board shorted out
Turned off the power at the breaker; took the screws out of the door panel; the control panel was already loose; I took the lock mechanism off the panel, and then removed the electric bundle panel fro...read more

board was blown
second time on this dishwasher in 5 yearss. removed the front cover as well as the indicator panel. board slides and unhooks . I should have taken a picture of the wire connections but the colors m...read more

Lights flashing on the selections and nothing but the cancel button working
Take the 6 torx screws loose and pull down the face. Pop out the bi-metal fuse that is in the current board. Unhook the wires attached. Pop out the old board. Attach the wires to new board. Put the bi...read more