My Orders
KitchenAid Dishwasher Caps and Lids
GET YOUR OFFICIAL KitchenAid PARTS TO ENSURE VICTORY
Popular KitchenAid Dishwasher Caps and Lids
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
Installation Instructions
James from Brandon, FL
Rinse Aid Cap was not secured and during dishwaher run the cap sat on the heating coil and melted.
This is simple, we don't know exactly how, but when we used the dishwasher the cap must not have been twisted correctly, and after the dishwasher shut down we discovered the cap was on the heating coil and melted. I know that it was easy to fix, but the reason I ordered it from PartsSelect was their price was much lower than Kitchen Aids,
... Read more
(the maker), Lowes (where we bought it), and other sites we searched for the part.
Read less
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
Installation Instructions
Kathryn from WINTERPORT, ME
Rinse aid cap was melted when it came out of the designated spot and melted against the heat coil.
Open the washer door, remove old rinse aid cap. Place new cap into designated spot, screw into place.
Installation Instructions
DANIEL from STAMFORD, CT
Owner lost parts. Reordered them.
Cut DW brackets to size, attached to DW. Bent back tabs, pushed DW into place and installed screws.
This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws in to the dispenser, so if your cap is damaged you can simply screw it out, then screw in the new one. The rinse aid cap is approximately 2 inches in diameter and is sold individually. This is an OEM part, directly from the manufacturer.
This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws in to the dispenser, so if your cap is damaged you can simply screw it out, then screw in the new one. The rinse aid cap is approximately 2 inches in diameter and is sold individually. This is an OEM part, directly from the manufacturer.
Installation Instructions
Donald from MANHATTAN BCH, CA
rinse aid cap came loose and melted in the bottom of the dishwasher
Received the new cap and twisted it into place.
The plastic button covers the sharp ends of screws along the edge of the dishwasher tub. Sold individually.
The plastic button covers the sharp ends of screws along the edge of the dishwasher tub. Sold individually.
Installation Instructions
Royce from GREENSBORO, NC
Dish rack slide arms losing ball bearings
Unscrewed mounting screws, pulled dishwasher out halfway, replaced arms, 4 screws each side .....very simple 30 min tops. Parts perfect and quick delivery!
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This genuine Whirlpool cover is a key component of your dishwasher, compatible with several models under the Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef lineups. It serves as a sump cover, attached to the tub bottom, channeling and collecting water directly into the pump to ensure optimal functioning. For your safety, we recommend unplugging the dishwasher or switching off the house circuit breaker before installing this piece. A pair of work gloves is also advised to guard your hands during installation. Be certain of the part number's compatibility with your particular model before purchasing. Its design may vary in size and shape so a precise fit is essential for appropriate functioning.
This genuine Whirlpool cover is a key component of your dishwasher, compatible with several models under the Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef lineups. It serves as a sump cover, attached to the tub bottom, channeling and collecting water directly into the pump to ensure optimal functioning. For your safety, we recommend unplugging the dishwasher or switching off the house circuit breaker before installing this piece. A pair of work gloves is also advised to guard your hands during installation. Be certain of the part number's compatibility with your particular model before purchasing. Its design may vary in size and shape so a precise fit is essential for appropriate functioning.
This rinse aid cap or fill cap is for your dishwasher and it screws into the jet dry dispenser. Sometimes the cap can become loose and fall out, which can cause it to melt from the heater. If your cap is damaged or missing, this is the part you will need to replace it. It is made of white plastic and is a little more than an inch in diameter. This rinse aid cap is sold individually.
This rinse aid cap or fill cap is for your dishwasher and it screws into the jet dry dispenser. Sometimes the cap can become loose and fall out, which can cause it to melt from the heater. If your cap is damaged or missing, this is the part you will need to replace it. It is made of white plastic and is a little more than an inch in diameter. This rinse aid cap is sold individually.
Installation Instructions
Joan from Glendora, NJ
the rinse aid cap fell into the bottom of the dishwasher and got burnt by the coils. It was letting the rinse aid empty out every time I used the dishwasher because the seal was broken.
I just put the new cap on and that was it.
Installation Instructions
Clark from GRASONVILLE, MD
Lower wash arm cap was worn thin allowing the spray arm to hit the dish rack.
The actual problem was the plastic wash arm cap was worn down and not holding the spray arm in place allowing it to hit the lower dish rack and stopping it from turning. The cap is on a threaded steel stem and is easily removed. The spray arm lifts off the stem and its replacement slips right on. Then install the new wash arm cap by screw
... Read more
ing it on the stem.
Read less