Packing 064-20064-10

This packing, also known as a gasket, is sourced from the original manufacturer for use in outdoor power equipment engines. It is a small rubber ring designed to seal the area between the fuel strainer bowl and the fuel tank/line to prevent fuel leaking out and air entering. Over time the rubber material may become brittle, crack, or lose its elasticity. A faulty ring will result in improper fuel flow, fuel leakage and even engine failure, disconnect any relevant components, carefully remove the old packing, clean the surfaces, install the new packing and associated components, reconnect the parts, and test for leaks and proper operation. Detach the starter assembly from the fuel system and carefully set it aside. Remove the packing and clean the mating surfaces to remove dirt, debris, and remaining residue. Position the new packing on the mating surface and reattach the starer assembly.