The purpose of a dishwasher timer is to control the unit's cycles by regulating the length of time that power is directed to each component.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD21X10200 replaces these:
AP3791476, 1088591
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Martin Kasper
August 9, 2019
My dishwasher has been emptying the water when it wants to and now has stopped empty waster at all. I know the pumps works when it gets the right signal. I fell it is the timer since every thing else works fine. The part number for this model is 904, does this sound likely. If so i will order it and put it on myself. Thanks. Ps it continues to wash all through empty cycle. Thank martin
For model number GSD4100JOOC
Hello Martin, thank you for inquiring. If it is not the Motor and Pump part number PS260801, then you will want to consider replacing the Drain Solenoid part number PS260117 for your model. I hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.