Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nathan
November 13, 2018
If i replace the circuit board will this fix the issue of the dryer continuing to run unless i unplug it? Serial number is y7d75auf405433j. It is a Samsung dryer.
For model number DV50F9A6EVW/A2
Hello Nathan, Thank you for the question. If the appliance continues to run and will not turn off on its own at the end of the cycle, it indicates an issue with the timer. The timer on this model is built into the control board, so the board will need to be replaced. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
George
September 11, 2019
I have 120 volts at one end of my heating element. No voltage ( 120 ) on the other side this coming from the control board. Will this $$ fix my problem and what all other safety devices does it control?
For model number DV50F9A8EVP/A2
Hi George,
Thank you for your question. To test the heating element, set your multimeter to the R x 1 resistance scale. Touch each meter probe and to one end of the element. If you receive a reading of infinite resistance, then your heating element is no longer functioning properly and you will have to replace it. If it checks out fine and if it checks out fine the issue is likely the control board and it will need to be replaced. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Sylvia
February 16, 2022
When I push the power button it won’t come on it throws a code FE is that the whole circuit board needs replaced
For model number Dc9201310a
Hello Sylvia, thank you for writing. The FE error code appearing on Samsung dryer's display means a drying fan error. For us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number, please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Andrew
November 6, 2018
Will this part fix the issue?The dryer will not stop unless you unplug it or open the door.
Hello Andrew, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
