Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
George A - April 25, 2018
Verified Purchase
easy repair, perfect part
part was new and worked immediately
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nicolas
February 28, 2018
Only hot water, no cold water, the water supply and is ok, meantime I switched cold to hot inlet hoses , my question is : What is the most common way to repaired it. Do I only replace the inlet coil or do I have to change the control board? Thanks
For model number FFLE2022MW1
Hi Nicolas, Thank you for the question. The most common issue would be the water valve, PartSelect Number PS6012202. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Graydon
June 3, 2019
Hi - unit is not filling with water. I have supply water and clean filter screen in the water valve but nothing, hot or cold. I'm getting 110v on each coil terminal, but coils are not energizing. Ohms measure 1.36k across each coil and the coils do work when applying 110v outside of the unit. Could it be something to do with the level switch? Also, what are the two terminals for that are on the output of the valve?Thanks,
graydon
For model number FFLG2022MW3
Hello Graydon, thank you for writing. For this symptom you will want to consider either this 3 Coil Water Inlet Valve part PS6012202, the Door Latch with Switch part PS5574024, or the Control Board part PS10057472. When testing it for continuity, it should read as between 500-1500 ohms to be working correctly. The terminals are for connecting the wires from the washer. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Craig
April 18, 2022
Water continuously dripping into tub. Is it possible to clean the supply valve to stop the leaking or do I need to replace the valve?
For model number FFLE2022MW2
Hello Craig, thank you for your question. the Water Valve PS6012202 on the back of your washer may have failed. Or, If the drain pump is cracked or damaged, or if the bearings are worn out, the drain pump may leak water. If this is the case, there is not a fix for this. The pump PS7783938 must be replaced. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
how do i remove the back so i can replace part 137465100 on a fridgidaire cfle2022mw2 stacking washer/dryer
For model number cfle2022mw2
Hello Patrick, thank you for contacting us. You do not need to remove the back to install this part. You may need to de-attach the venting from the dryer to fully access the back of the dryer. Remove the hot and cold water supply lines connecting to the inlet valve. Unthread the screw securing the inlet water valve. Use a putty knife to release the two retaining clips securing the top of the washer. Disconnect the lid lock assembly connector and remove the top of the washer. Once the top is removed you see the inlet valve, beside the drum. Replace the valve and reconnect the lid lock assembly connector to the top washer. Align the washer top and connect it back with the retaining clips. Connect the water supply line and screw tight the inlet valve from the back. We hope this information is useful!