Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Clifford M - December 2, 2021
Verified Purchase
Worked perfectly
Nice to see they've extended the protective sleeve around the wires past the end of the mount so the wires don't flex and fatigue fail at that spot
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shawn
November 17, 2017
I am also getting an error code 8e. Will this be the correct fix for the issue? Thank you for your help.
For model number wf45h6300ag/a2
Hi Shawn,
Thank you for your inquiry. The 8E error code is referring to a over current error. Unplug the power cord or turn the circuit breaker off for about 30 seconds. Turn the washer back on and try a different setting. If the problem continues you will need to replace the mems sensor. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Preston
August 28, 2017
My washer is throwing code 8E and says mems sens is this what part I need in order to fix this problem?
For model number WF457ARGSGR
Hi Preston,
Thank you for contacting us, yes the 8E Error means you need to replace the Mems Sensor.
Good luck with the repair
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
April 29, 2018
Issue i have is code ue comes up and cannot reach pressing speed to remove water from clothes. Only way to get it through it was to remove this sensor from the drum and wire it to the washer housing in the correct orientation thereby keeping it still. Would replacing this sensor be expected to fix this scenario?
For model number WF45H6300AW/A2
Hello Joe, thank you for your question. The UE code is in reference to an unbalanced load. I would recommend replacing the part you wired to the washer housing to see if that fixes the problem. If it does not, the issue is probably with the Rotor Position Sensor DC31-00098A. I hope this helps!
Was this helpful?
Thank you for voting!
Mandy
May 9, 2019
Washing machine did not dry shirt!
For model number wf45h6300ag/a2
Hi Mandy,
Thank you for your question. If the washer is not spinning the water out of the clothes, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door switch assembly, the pump, the drain hose, the electronic control board and the motor. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
