Part Location Diagram of WB32X10012 GE Drip Bowl - 6 Inch
See part 122 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Drip Bowl - 6 Inch WB32X10012

 Fits your 107RHV786J!
★★★★★
★★★★★
17 Reviews

Rated by 32 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 11.35
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 107RHV786J!
PartSelect Number PS244677
Manufacturer Part Number WB32X10012
Manufactured by GE
Product Description

Drip Bowl - 6 Inch Specifications

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint.
Part# WB32X10012 replaces these:
AP2634757, 3, WB32X0002, WB32X0009, WB32X0011, WB32X0020, WB32X0026, WB32X0036, WB32X10012R, WB32X11, WB32X2, WB32X20, WB32X26, WB32X36, WB32X36A, WB32X36R, WB32X5026, WB32X9
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
17 Reviews
4.5
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    3
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 32 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
the items ordered replaced the worn out ones.
the replacement items fit really good. It was a matter of remove and replace,
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Carl from Morristown, N.J., NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Elment Burned Out. Drip Bowls andTrim Rings Severly Tarnished and Very Old. Timer Knobs Broken.
Cleaned oven. turned off power at breaker panel. Removed mounting screws and pulled out oven element 4 inches to expose electrical terminals. Removed terminal screws and removed burned out element being careful not to let wires go back into insulation. Reversed procedure to install new oven element. Slid out old trim rings and drip bowls after slightly tilting surface elements. Cleaned top of range and installed new rings and bowls. Removed broken timer knobs. New knobs would not push on to the metal shafts until the metal retainers remaining in the slots were pushed out using a small screwdriver.
Other Parts Used:
Bake Element Timer Knobs - Kit of 3 Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Joseph from Clarkston, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacing rusted drip pans on a 30 year old stove.
Just lifted the electric components Remove drip plans and trim rings and replaced with new drip pans and trim. Your company was incredible in there delivery of the parts..One day. You made my husbands very happy.
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Dorothy-Anne from SHREWSBURY, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problems
lift eye slide in bowl and trim ring, put the eye back down,
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Darlene from NORTH AUGUSTA, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip bowls WAY out of style
So this ancient stove we inherited when we bought our house had the drip bowls wrapped in tin foil. We've searched EVERY (not joking) store in our area for drip bowls that would fit it, but apparently Hotpoint wanted to make sure you could never do this - well, at least not easily. No one, not one store carries drip bowls to fit it. I finally searched online and partselect.com came up first on the list. I was amazed they had the right part! Better yet, ordering was beyond easy, and they came super quick. Popped in the parts in less than 2 minutes, and we're good to go - makes this old stove look new! (well, if this was the 80's, lol) When I clicked on the part it said which stoves it would fit, which was also very helpful. Thank goodness for Part Select! Otherwise we would've had to rewrap those disgusting old bowls... I'd recommend this site in a heartbeat!
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Joanna from Fargo, ND
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced old burners
Both the eight inch burner and the the six inch burner were not an exact fit. I used the old rings and the new burners. The eight inch burner fit well with the new drip bowl;however, the six inch burner did not fit with the six inch drip bowl and I had to grind off about an eigth inch from the diamiter of the drip bowl. I replaced most all the wiriing and after I get the lower oven element rebuilt it will be ready for a test drive ..can't wait!
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Tilt Lock Hinge Mounted Surface Unit - 6" Tilt-Lock Hinge-Mounted Surface Burner - 8"
  • Terry from Ulen, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old drip bowls and trim rings badly stained and dirty
It was so easy to find the correct items on your web site and they arrived in a very timely manner. Perfict fit. Now I know how to get parts when I need them.
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • Ruth from Wells, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner element had burned out
turn off power at breaker. lift element from stove top lift out drip bowl . remove clips and ceramic cover. unfasten three wires. using new element install three wires to new burner ,clip on ceramic cover then slide burner back in to stove top and install drip bowl turn on power and test
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Tilt Lock Hinge Mounted Surface Element - 6"
  • Mark A from Industry, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed To Replace Drip Bowl
I just replaced them.
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch
  • DIANA from TINTON FALLS, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced rusted out Burner
I have tilt up burners on my Range, and decided to replace one that have finally rusted out the part that holds it in place. Repair was easy- installed according to the enclosed instructions. Parts arrived in good condition and very timely. A+
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Trim Ring - 8 Inch Trim Ring - 6 Inch Tilt Lock Hinge Mounted Surface Element - 6"
  • alan from Tallahassee, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniela
April 30, 2018
Is it necessary to have the trim rings with the bowls? I'm replacing all 4 burner accessories on my inherited stove and, presently, the large one has a bowl and ring but the other 3 only have the bowl. Just not sure what i need. Thanks for the help!
For model number J B500G0B1
PartSelect logo
Hello Daniela, thank you for your question. For this model there is only one trim ring showing on the schematic. The other three burners do not need trim rings. If you're looking to replace the 4 burner accessories you would want to order 1 of Drip Pan - 8" Part Number: PS244760 and 1 of Trim Ring - 8" Part Number: PS244479, 2 of Drip Bowl - 6" Part Number: PS244466 and 1 of Drip Bowl - 8" Part Number: PS244470. Good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Barbara
January 7, 2020
I have 1950 GE double oven range . I need drip pans and rings for stove the rings lock into to burner . I will also need 8 “ burner for stove hooks up by wires to burner the numbers i got off stove were j408w1cr16 y and wooo353
For model number J408w1cr
PartSelect logo
Hello Barbara and thank you for writing. Your model number is not recognized. We carry the following Ge parts for older models, these parts might still work with your unit; however, as these parts do not show as being compatible with your model number, we can not guarantee that it will fit. We would suggest contacting the manufacturer directly. We hope this helps. Please contact us anytime if you require further assistance. Trip bowl with lip small PS244398 Drip bowl large PS244399, However, the burner you require seems to be discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Mark
March 18, 2024
I need to know the depth of the 6" burner bowls. Part#WB32X10012
For model number JSS01001
PartSelect logo
Hello Mark, thank you for reaching out. According to our research, the overall depth of the 6 inches burner bowl, part number PS244677, is approximately 6.375 inches. We hope this information helps!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS244677
Manufacturer Part Number: WB32X10012
Brand
Model Number
Description
General Electric
107FG50G
Range - GE Range/Stove/Oven Model 107FG50G Parts
Hotpoint
107RB590G
Range - Hotpoint Range/Stove/Oven Model 107RB590G Parts
Hotpoint
107RC36B
Range - Hotpoint Range/Stove/Oven Model 107RC36B Parts
Hotpoint
107RC445F
Range - Hotpoint Range/Stove/Oven Model 107RC445F Parts
Hotpoint
107RC690H
Range - Hotpoint Range/Stove/Oven Model 107RC690H Parts
Hotpoint
107RC75A
Range - Hotpoint Range/Stove/Oven Model 107RC75A Parts
Hotpoint
107RC85A
Range - Hotpoint Range/Stove/Oven Model 107RC85A Parts
Hotpoint
107RF38-E
Range - Hotpoint Range/Stove/Oven Model 107RF38-E (107RF38E, 107RF38 E) Parts
Hotpoint
107RHV755J
Range - Hotpoint Range/Stove/Oven Model 107RHV755J Parts
General Electric
107RHV786J
Range
General Electric
108RA220E
Range - GE Range/Stove/Oven Model 108RA220E Parts
General Electric
108RB15A
Range - GE Range/Stove/Oven Model 108RB15A Parts
General Electric
108RB18A
Range - GE Range/Stove/Oven Model 108RB18A Parts
General Electric
108RB545-G
Range - GE Range/Stove/Oven Model 108RB545-G (108RB545G, 108RB545 G) Parts
General Electric
108RB646H
Range - GE Range/Stove/Oven Model 108RB646H Parts
General Electric
108RS40J
Range - GE Range/Stove/Oven Model 108RS40J Parts
Hotpoint
109RB42
Range - Hotpoint Range/Stove/Oven Model 109RB42 Parts
Hotpoint
109RB55
Range - Hotpoint Range/Stove/Oven Model 109RB55 Parts
Hotpoint
109RD23
Range - Hotpoint Range/Stove/Oven Model 109RD23 Parts
General Electric
1J2441M1
Range - GE Range/Stove/Oven Model 1J2441M1 Parts
General Electric
1J2442M1
Range - GE Range/Stove/Oven Model 1J2442M1 Parts
General Electric
1J2442M2
Range - GE Range/Stove/Oven Model 1J2442M2 Parts
General Electric
1J2442M3
Range - GE Range/Stove/Oven Model 1J2442M3 Parts
General Electric
1J245W1N1
Range - GE Range/Stove/Oven Model 1J245W1N1 Parts
General Electric
1J4021M1
Range - GE Range/Stove/Oven Model 1J4021M1 Parts
General Electric
1J4021M2
Range - GE Range/Stove/Oven Model 1J4021M2 Parts
General Electric
1J4021M3
Range - GE Range/Stove/Oven Model 1J4021M3 Parts
General Electric
1J4021M4
Range - GE Range/Stove/Oven Model 1J4021M4 Parts
General Electric
1J4021N1
Range - GE Range/Stove/Oven Model 1J4021N1 Parts
General Electric
1J4021N2
Range - GE Range/Stove/Oven Model 1J4021N2 Parts
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service