1J2441M1 General Electric Range - Overview

Diagrams for 1J2441M1

See every part. Know exactly what you need.

Parts for the 1J2441M1

$21.45

Drip Bowl - 6 Inch

★★★★★

(17)

Part #WB32X10012

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

$45.29

Bake Element

★★★★★

(28)

Part #WB44X5099

This closed hinged-style bake element has screw in terminals.

Center Piece - 8 Inch Burner

Part #WB32X51

This part it is used to cover the center of the coil burner. Sold individually.

$77.75

Power Terminal Block Kit

★★★★★

(1)

Part #WB17X5095

This kit comes with the terminal block, nuts and wires.

Thermostat

Part #WB21X5209

The length of this thermostat's capillary is 62 inches.

SWITCH OVEN

Part #WB22X5132

Broil Element

Part #WB45X56

Trim Ring - 6"

Part #WB31X50

This 6 inch low rise burner trim ring is intended for use with attached style low rise tilt lock surface mount burners on GE electric ranges.

DISCONTINUED

Part #WB23X28

DISCONTINUED

Part #WB30X184

Common Symptoms of the 1J2441M1

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Oven not heating evenly

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The lower bake element burned out.

67 of 72 people found this instruction helpful.

Carlos from Southaven, MS
Really Easy
Less than 15 mins
Nutdriver

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, reconnected the wires to the new element, reattached it to the oven and voila!

It worked. What was really cool, once I ordered the part, I received it in only two work days!

Goo ... Read more

Read less

Was this helpful?

Replaced lower element in GE Spectra range.

22 of 31 people found this instruction helpful.

Phillip from Greeneville, TN
Really Easy
Less than 15 mins
Nutdriver

Hardest part was getting the wrong element and having to send it back and reordering correct one....too many variables. Two screws inside the oven removed, pull out range and take off back and attach new element to plug ins!

Was this helpful?

Old element burned through. Sparks were flying!

19 of 26 people found this instruction helpful.

David from Baton Rouge, LA
Really Easy
Less than 15 mins
Screw drivers

Turned off power at breaker panel. Removed 2 screws attaching element to stove. Pulled element out a couple of inches and removed 2 wires attached with screws. Installation is reverse order of removal.
Be careful not to twist the terminal ends when tightening screws.

shipping was very fast!

Was this helpful?