108RS40J General Electric Range Parts & Repair Help | PartSelect
Models > 108RS40J

108RS40J General Electric Range - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(16)
PartSelect #:PS244677
Manufacturer #:WB32X10012
This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.
$5.68
In Stock
Order within the next 11 hrs and your part ships today!
(3)
PartSelect #:PS244680
Manufacturer #:WB32X10013
This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.
$8.20
In Stock
Order within the next 11 hrs and your part ships today!
(1)
PartSelect #:PS244048
Manufacturer #:WB30X354
This kit includes an 8", three wire, 2450W surface element. This low rise element has an attached trim ring, and a terminal block with all three-wire units.
$57.80
In Stock
Order within the next 11 hrs and your part ships today!
PartSelect #:PS244050
Manufacturer #:WB30X356
This kit does NOT include the drip bowl. This tilt lock hinge mounted surface element kit includes a 6 inch, three wire, 1350 watt surface element. These standard low rise element...
$59.10
In Stock
Order within the next 11 hrs and your part ships today!
(5)
PartSelect #:PS249449
Manufacturer #:WB44X5043
$43.69
In Stock
Order within the next 11 hrs and your part ships today!
(1)
PartSelect #:PS232636
Manufacturer #:WB17X5095
This kit comes with the terminal block, nuts and wires.
$55.33
In Stock
Order within the next 11 hrs and your part ships today!
PartSelect #:PS236568
Manufacturer #:WB24K2
No Longer Available
PartSelect #:PS256886
Manufacturer #:WB8X191
No Longer Available
PartSelect #:PS244598
Manufacturer #:WB32M1
This part is located under the control panel.
No Longer Available
PartSelect #:PS249452
Manufacturer #:WB44X5045
No Longer Available
Questions and Answers for 108RS40J
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

50+ Yr Old Cooktop Burner had one of its two coils burn out

  • Customer: Barbara from Smyrna, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 20 of 23 people found this instruction helpful
The hardest thing was finding the part to order! The GE Cooktop is from 1957 when the house was built. I followed the instructions that came with it. After seeing where the screw on hinge was supposed to be, I cleaned away the caked grease and finally saw the screw. I had to use a nut driver to remove it since it didn't have a slot for a screwdriver. Once th... read more

The oven's bottom bake element burned up

Bake Element – Part Number: WB44X5043
  • Customer: Dennis from Los Alamos, NM
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 15 of 19 people found this instruction helpful
First I turned the circuit breaker switch off for the stove unit. I then removed the two screws that hold the element in place at the back of the oven. I then pulled the element out about 3 inches and disconnected the two wires. I attached the new element, bolting the wires into place and then screwed the element back into place on the back wall of the ove... read more

Burner had shorted out

  • Customer: John from Granite City, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 14 of 16 people found this instruction helpful
It was so easy. I turned off the power to the range, loosened the hinge screw and removed the burner unit from the stovetop. Next I removed the two spring clips holding the ceramic housing covering the three connectors. Then I loosened the three screws holding the 3 wire connectors to the burner, reconnected the 3 wires to the new burner unit, positioned... read more