Make sure you haven't got the discount earlier.
TIMER WD21X33639
Fits your HDA3400G02CC Dishwasher!
★★★★★
★★★★★
Rated by 4 customers
Really Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
$
122.32
In Stock
Get FREE EconoShip on orders over $100! T&C apply
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your HDA3400G02CC Dishwasher!
PartSelect Number PS17137077
Manufacturer Part Number WD21X33639
Manufactured by
GE
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Not draining | Will not fill with water
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WD21X33639 replaces these:
WD21X10155
Customer Reviews
Average Rating:
1 Review
★★★★★
★★★★★
5.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard S - September 29, 2020
Verified Purchase
Dishwasher is working again!
Thanks for helping us find the right part. Installation was pretty easy with the help of a couple of YouTube videos we found. We really like our dishwasher and are glad we did not have to junk it.
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 4 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The timer was dead
Received the new timer in the late afternoon. Waited until the next morning to work on it. The biggest problem was taking the door apart. the time slid into a bracket and was held on with 2 screws and it's plug. This went like a piece of cake. The next problem was getting the door back on and together by myself.....but I managed it. The
... Read more
whole job took less than one hour.....and the dishes from the night before were given the test run!
Read less
-
Richard from EDGEWATER, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not drain.
The washer ran through a full cycle, but the water didn't drain out. I pulled out the drain vent and checked for foreign objects. Also checked at the drain hose/disposal joint and there was no blockage. After removing the bottom panels I noticed the solenoid was shot. Cylinder was burnt up and stuck solid in the up position. I went online
... Read more
and found that a main cause of this can be from the timer causing the solenoid to over exert and burn out. I decided if I was going to order parts and dig into a repair I should replace both. For the timer it is just a matter of unscrewing the inner door panel and unplugging the old timer. Then inserting new one. Couple of things I ran into were the door is no longer heavy enough to stay down so I grabbed a waffle iron as a weight to hold it down. Also will need to unscrew the set screw on the Door lock latch's bottom side. Pay close attention to how it was together helps. For the solenoid I removed the main screws holding the unit in place as well as the c-clip holding the plastic arm. Undo the spring and plug and the whole unit comes out. Reverse these steps with the new solenoid to install.
Read less
Other Parts Used:
-
Jay from North Liberty, IA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
10 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Not Draining
Simply remove the kick plate locate the water drain selonoid. Took two screws out and one spring off.
So easy. Glad I did not hire a plumber.
So easy. Glad I did not hire a plumber.
-
John from Drums, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher would not shut down, it stayed on first cycle
First I turned off the breaker so all the power was off to the dishwasher. Then I removed the door handle, which has one screw on the bottom side. Next i pulled the timers handle off, just pull it straight out. Next i opened the door on the dishwasher and removed the 8 screws on the back of the door. Next i pulled the door panel apart to
... Read more
get to the timer. I disconnected the three plugs from the old timer, then unsrewed the two screws holding the old timer in place. Put the new timer in, and put it all back together. The new timer works great and it solved the problem
Read less
-
chad from springfield, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS17137077
Manufacturer Part Number: WD21X33639
Manufacturer Part Number: WD21X33639
Brand
Model Number
Description
Back to Top
TIMER
$
122.32
In Stock
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.