Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
October 3, 2019
Will not complete a wash cycle. Stops with water in the tub, or does not spin fast enough to wring the water out of clothes
For model number CFW4000FW1
Hello Mike, thank you for writing. This may be due to either a faulty Drain Pump, part number PS7783938, or Door Lock and Switch Assembly, part number PS12364048 for your model. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
January 17, 2022
Washer turns on without anyone engaging it! Sometimes turns on at night by itself! Will replacing the control board remedy this problem?
For model number FTF2140ES0
Hello Patrick, Thank you for the question. Normally this is an indication the Washer Electronic Control Board is faulty and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Terry
July 22, 2021
This washer "end of wash cycle" signal randomly starts beeping. How is this fixed?
For model number LTF2140FS2
Hi Terry,
Thank you for your question. If your washer has run 30 wash cycles, the beeping is a reminder that you need to run the clean wash cycle. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Monty
September 14, 2022
Machine will spin during wash cycle, but high speed spin will not engage. Drain is clear, pump is working. When the high speed spin tries to engage there is humming sound but no movement. Checked the door lock, that works as it should. Main control board will come on by it's own sometimes. Not sure if the main board or the motor control board is the culprit here, leaning towards the electronic control. Any thoughts?
For model number LTF2140FS1
Hello Monty, thank you for contacting us. From the symptom of the humming sound, we can suspect the drive motor, part number PS2373340, is most probably faulty. It is also possible that the electronic control board, part number PS12724037, is defective and not energizing the door lock. The electronic board manages the spinning while the drive motor executes it. If you have any follow-up queries please feel free to reach out to customer service, we are available seven days a week. Glad to be of help!
Now when I plug in the washer nothing happens, no lights come on, no beep, nothing at all, like it would before. Would this be a bad control board?
For model number FTF2140FS1
Hi John, thank you for contacting us. Yes, the issue seems to be due to a control board, part number PS12724037. Good luck with your repair!
Was this helpful?
Thank you for voting!
Dave
May 15, 2023
I did the diagnostic test for this Frigidaire washer that is not completing a spin cycle and leaving water in the tub at the end of a regular cycle. All tests worked but there was an error code of 43 at the end of the test which states it needs a new control board. I ordered one from you all but it sounds like sometimes this part is misdiagnosed. Just wanted to know what else this could be if the control board replacement doesn't fix it. Thanks.
For model number FTF2140FS1
Hello Dave, thank you for reaching out. The error E43 is related to the control board. In this error code, the control board thinks the door locking has an issue. If replacing the control board, part number PS12724037, does not fix the issue, then the problem is with the door lock assembly. You may need to replace the door lock assembly, part number PS12364048, to resolve the problem. We hope this information helps!
Electrolux washer stopped. Has 9 beep code then repeats. Will not do anything. Have to shut off breaker to stop beep sequence.
For model number LTF2140FS2
Hello Tim, thank you for your inquiry. According to our research, this message indicates that there is a problem with the electronic control board, part number PS12724037. You may need to replace it to fix the issue. Glad to be of assistance!
Was this helpful?
Thank you for voting!
RICK
December 21, 2023
All the lights on the right of the display panel are flashing doorlock, wash, rinse, final spin, control lock sysmbel and beeping they go off for 5 seconds and then start doing it all over again. would replacing the control panel fix this?
For model number LTF2140FS2
Hi Rick, thank you for the question. Based on our understanding, we would recommend checking the door lock first. If it is fine, the issue is most probably with the control board, part number PS12724037. It manages the washer's functions such as filling, washing, draining and spinning. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.