Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel
July 31, 2023
How is the choke return spring supposed to be installed?
For model number 33R777-0012-G1
Hi Daniel, thank you for contacting us. We have found some relevant instructions for you to replace the return spring. They may not be of the exact same model, but they will help you with the process. You may follow the following steps: insert the spring into the shaft. Fix the small locking end at the top. Insert the shaft back into the carburetor. The tab of the spring at the other end must sit right beside the idle screw on the carburetor body, and you want to make sure that the throttle arm is in front of the screw. So while pushing down, insert the spring there. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.