Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
May 25, 2022
How do I install this? It looks like I need to pull out the cooktop? How do I do that?
For model number magic chief 88fk
Hi Peter,
Thank you for your question. Before performing this repair, please turn the circuit breaker off to the cooktop and disconnect the power. If your cooktop is held in place with brackets, you will need to unthread the screws that secures them to the counter and bend the brackets down, so you can remove it. The cooktop should be held in place with some foam tape. You can either use a putty knife to gently go around the cooktop, so you can lift it up or you can open a cupboard door and use your hand to push it up. Once you have removed the cooktop from the counter, place it on a sturdy surface, so you can work on it. Then remove the knobs from the cooktop. Once you have the knobs removed, use a screwdriver to unthread the screws securing the glass cooktop to the burner box. With the screws removed you can now remove the cooktop. There is usually tape securing the glass to the burner box. If you are unable to remove the glass, gently use a putty knife to go around the edges to loosen it. Then gently remove the glass from the burner box. Then remove the box covering the switches. Then remove the wires connected to the old switch and use a screwdriver to unthread the screws securing the switch to the console. Then install the new switch by attaching the wires to it and secure it to the console with the screws. Then follow the steps in reverse to reinstall the cooktop into the counter. Restore power to the cooktop and it should now work for you. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.