Part Location Diagram of WPW10269625 Whirlpool Dryer User Interface
See part 4 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Dryer User Interface WPW10269625

 Fits your YWED5600XW0 Dryer!

Rated by 1 customer 

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 356.39
  Special Order
Get FREE EconoShip on orders over $100! T&C apply
$60Recycling Rebate
 Fits your YWED5600XW0 Dryer!
PartSelect Number PS11751513
Manufacturer Part Number WPW10269625
Manufactured by Whirlpool
Product Description

Dryer User Interface Specifications

This user interface is for dryers.User interface processes the cycle settings you choose. The interface also houses the display for the dryer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool.
Part# WPW10269625 replaces these:
AP6018211, W10269625
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Bad User Interface Board
I removed the three screws across the back of the console and then used a putty knife to carefully release the spring latches on either side of the front of the console base to free up the console (not obvious without YouTube). I then removed all of the screws from the interface board and unplugged the connector from the control board, but there is also some double-sided tape holding the board down. You have to use the putty knife to split that adhesive to finally remove the board. I was careful to ground myself while handling the new board and then just reversed the steps for installation.
  • Bob from CINCINNATI, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff
August 30, 2017
Is this the correct part to fix the timer? When timer is set for 60 minutes, it starts counting minutes down 60, 59, 58....then jumps down to 14, then counts down from there. clothes obviously do not dry. I didn't see a timer to replace on the part list. help please.
For model number WED5600XW0
PartSelect logo
Hi Jeff, Thank you for the question. Yes looking at the model number provided the timer is built into this board and the board will need to be replaced. Good luck with the repair!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11751513
Manufacturer Part Number: WPW10269625
Brand
Model Number
Description
Whirlpool
WED5600XW0
Dryer - Residential, Electric
Whirlpool
WED5600XW1
Dryer
Whirlpool
WGD5600XW0
Dryer - Residential 27" Gas
Whirlpool
WGD5600XW1
Dryer - Residential 27" Gas
Whirlpool
WGD5600XW2
Dryer
Whirlpool
YWED5600XW0
Dryer - Residential, Electric
Whirlpool
YWED5600XW1
Dryer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service