Make sure you haven't got the discount earlier.
Mold & Heater Assembly (Also O WPW10122550
Fits your 10653252201 Refrigerator!
Fits your 10653252201 Refrigerator!
PartSelect Number PS11748649
Manufacturer Part Number WPW10122550
Manufactured by
Whirlpool
Product Description
Mold & Heater Assembly (Also O Specifications
The mold heater is an electrical device that thaws the ice quickly so it can be released from the icemaker mold.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
KitchenAid, Whirlpool, Kenmore, Maytag.
Part# WPW10122550 replaces these:
2212351, W10122550
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Melvin
April 7, 2018
My ice maker has stopped releasing the ice cubes. It fills with water and freezes the cubes but they will not drop into the container. Before we took out the water filter it was only making 2 cubes instead of 5. Now that we have removed the filter we have 5 cubes but they will not release even after 24 hours. Do we need a new mold and heater assembly or a thermostat? Is there an instruction manual on how to remove the ice maker?
For model number 106.56824603
Hello Melvin, Thank you for your inquiry. Check the line going from the water inlet valve to make sure it is not cracked or clogged and test the water inlet valve with a multimeter to see if it is working and getting water to the ice mold. You can also test the thermostat with a multimeter as well. You can test the ice maker itself by using a piece of insulated wire with the ends stripped. Most heat release ice makers will have a removable cover at the front. Behind the cover is a series of electrical test points that can be used to diagnose the ice maker. The unit can be manually operated by inserting an insulated jumper wire into test points “T” and “H” to initiate a “test harvest”. The jumper should be insulated 14 gauge solid wire that has the insulation stripped back about 3/4 of an inch on both ends, and bent into a “U” shape. When inserted into the test points for 5 to 10 seconds, the motor should start and the cycle will continue on its own. You may have to manually close the freezer door switch for this to operate.
This test will simulate a real harvest cycle and will operate the ejector blades, shut off arm and the fill valve in the proper sequence, and will allow you to do a proper diagnosis. This is a live voltage test and should only be performed by a qualified person. If the motor does not start, you can verify that you have power to the ice maker at test points “L” and “N”. If the ice maker is getting power and does not perform a cycle, then the module will need to be replaced. Otherwise, the ice mold and heater would need to be replaced. We do not have an instruction manual on how to remove the ice maker at this time, but we have included links to some of our videos on ice maker replacement to give you a general idea of the procedure, and there are some instructions from other customers listed under part# PS11749917. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Additional Links:
Bertrand
February 12, 2020
Hello,
The ice machine in my Whirlpool model gs2shaxkb01 does not work. after having made all the checks that you talk about on your site everything is functional such as: water supply is correct because the water goes to the distributor of the ice machine. i can use the water but there is no manufactured ice. the transmitter and receiver are working. when i connect the ice machine there are 120 volts from the refrigerator cable which powers the ice machine but the power does not go to the engine. what do you think would be the problem?
For model number GS2SHAXKB01
Hello Bertrand, thank you for your question. It sounds like the icemaker control has malfunctioned. We would recommend replacing PartSelect Number PS2341896. I hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748649
Manufacturer Part Number: WPW10122550
Manufacturer Part Number: WPW10122550
Brand
Model Number
Description
Back to Top
Mold & Heater Assembly (Also O
$
115.37
Special Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.