Enter the code USA15 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on July 1 at 11:59pm EST.
Door Striker WP99002644
Fits your MDBTT75AWQ Dishwasher!
Rated by 6 customers
Really Easy
15 - 30 mins
Ratings submitted by customers like you who bought this part.
Fits your MDBTT75AWQ Dishwasher!
PartSelect Number PS11747694
Manufacturer Part Number WP99002644
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Jenn-Air, Amana, Admiral.
Part# WP99002644 replaces these:
AP6014455, 99002644
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 6 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door handle was broken and would not release consistently
I removed the inner panel from the door. The handle and latch assembly was accessed right under the top of the inside cover. The wires were removed from the two switches. The new switches were connected on the new latch assembly. The assembly was placed on the outter door panel and the inner door cover was screwed back in place. Quick
... Read more
easy repair! Works likes new!
Read less
Other Parts Used:
-
William from DOVER, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
7 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Handle and Latch Assembly broke
Removed inside of door panel by taking torq screws out around the entire door. Carefully remove electrical connectors so Door Handle and Latch Assembly with Switches can be removed and replaced. Remove screws so entire dishwasher can be slid a couple inches out from under counter. Slide back insulation a bit, remove one torq screw to repl
... Read more
ace Door Striker. Back to working again.
Read less
Other Parts Used:
-
Phil from Belleville, WI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle broken
parts arrived in timely manner, they were correct and repair went well
Other Parts Used:
-
LARRY from MUNFORD, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The striker broke when repairing something else.
I pulled the machine from under the counter top and the striker is right in front just under the insulation. I pullled the insulation back just a little and screwed down the new striker plate. That's all. I moved the machine back uinder the counter and secured it. Done!
-
Stephen from Kopperl, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Striker broken
Was really easy to replace just unscrew the dishwasher and remove from under the counter about 3 inches. No need to disconnect the water line or electric. Unscrew one Torx (star) screw and put the new one in. Simple, just have the screw driver before you start.
-
Mike from Haskell, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle latch broke and door difficult to open
Removed the inside door panel using a power screw driver and torque bits. (5min) Removed the handle and latch assembley from the door. Door and Latch assembly was removable after the inner door panel was removed as 2 of the torque screws that held the panel also held the assembly. (1min) Removed the remaining 7/16 hex head screws that h
... Read more
eld the power and operators panel assembly to the outer door frame. (2min) Removed the electrical ribbon tape that supplies voltage and electrical functions to the rest of the washer so the panel could be physically be removed as the tape recipitical is attached to the door harness. (1min) Also be aware that the ribbon reciptical requires a small plastic clamp ring to be pulled forward to allow the ribbon to be reinserted. Put back together in reverse order. Use caution not ot over tighten screws that are use in plastic or vinyl materials. (20min)
Read less
Other Parts Used:
-
Glen from Clanton, AL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
11 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747694
Manufacturer Part Number: WP99002644
Manufacturer Part Number: WP99002644
Brand
Model Number
Description
Back to Top
Door Striker
$
11.08
Special Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.