This electronic board is located within the control panel.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid.
Part# WP8530995 replaces these:
8530995
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
October 31, 2019
Clean light flashing repeatedly and locked out but unit can be reset (all lights on) which then runs a rinse cycle. Then can run a normal up until heating needed. Will not run an energy saver cycle. Does the panel contain the board and will a new board cure this?
For model number KUDI01FLSS6
Hello Mark, Thank you for the question. This does sound like a defective Board. The board is PartSelect Number PS974101 and not sold as part of the Panel. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Hi, my kitchen aid dishwasher with model number kudi01flss6. Could not start. The start button plastic was worn out since few months and I used to turn it on with great difficulty using spoon ends or very tactically with finger but recently it just could not be pressed. Some times other lights with cycles turn on and some times it does not. What could be the issue?
For model number KUDI01FLSS6
Hello Alekha, Thank you for the question. This sounds like the Electronic Control Board, PartSelect Number PS11746116 was damaged and will need to be replaced. If the touch pad is also damaged the PartSelect Number PS10064580 Control Panel will need to be replaced as well. Hope this helps!